Please wait a minute...
水泥技术, 2018, 1(3): 30-33    
  实验研究 本期目录 | 过刊浏览 | 高级检索 |
轻质物料较粗成品的辊压及干式分选试验探索
中材装备集团有限公司
Experiment Exploration of Lightweight Materials Coarse Product by Rolling and Dry Sorting
Sinoma Technology and Equipment Group Co., Ltd.
下载:  PDF (1819KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 在实验室辊压-分选试验平台上,通过适当调节操作条件,能够将生料或水泥等常规物料粉磨并分选出适宜细度的成品。然而某些特殊物料成品要求较粗,同时又需满足干式粉磨及高效节能的技术要求,在不改变现有设备规格的前提下,有一定的实现难度。本实验室曾受合作单位委托,处理一批轻质物料(焦煤类物料),要求的成品相对较粗,经多次探索试验仍难以满足,之后对分选设备进行了优化调整,在不改变试验设备及干式粉磨条件的情况下,满足了成品的细度要求。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
何毛
王小峰
石国平
关键词:  轻质物料  辊压机  干式分选  较粗成品    
Abstract: Conventional materials such as raw materials or cement could be grinded and sorted into product with appropriate fineness under proper operating conditions in the laboratory rolling and dry sorting system. However, some special materials need to be grinded into coarser product with dry-type sorting, high efficiency and energy saving requirment, and it is even difficult under the premise of not changing the specifications of the existing equipment. Our laboratory has been commissioned by a cooperative unit to grind a batch of lightweight samples (materials like coking coal powder) into relatively coarser product, and the requirement was still difficult to meet after many exploration tests. At last, the fineness requirement of product was satisfied after the sorting equipment was optimized and adjusted, without changing the existing equipment and the dry-type sorting condition.
Key words:  lightweight materials    roller press    dry sorting    coarse product
收稿日期:  2017-12-27                出版日期:  2018-05-25      发布日期:  2018-05-25      整期出版日期:  2018-05-25
TQ172.633  
引用本文:    
何毛, 王小峰, 石国平. 轻质物料较粗成品的辊压及干式分选试验探索[J]. 水泥技术, 2018, 1(3): 30-33.
HE Mao, WANG Xiaoping, SHI Guoping. Experiment Exploration of Lightweight Materials Coarse Product by Rolling and Dry Sorting. Cement Technology, 2018, 1(3): 30-33.
链接本文:  
http://www.cemteck.com/CN/  或          http://www.cemteck.com/CN/Y2018/V1/I3/30
[1] 常亮.
辊压机液压系统操作压力的合理选用
[J]. 水泥技术, 2018, 1(4): 42-44.
[2] 肖静, 曹凯, 贺孝一.
磨内结构对水泥流动度的影响
[J]. 水泥技术, 2018, 1(3): 77-79.
[3] 朱守刚. 辊压机循环物料钢丝胶带提升机的应用[J]. 水泥技术, 2017, 1(6): 61-63.
[4] 侯龙华, 柴星腾, 贺孝一. 水泥辊压机预粉磨系统电耗评价探讨[J]. 水泥技术, 2017, 1(5): 19-24.
[5] 王振生. 生料中卸球磨粉磨系统改为辊压机终粉磨系统的方案对比[J]. 水泥技术, 2017, 1(5): 39-40.
[6] 张峰亮. 5 000t/d熟料生产线生料粉磨系统改造[J]. 水泥技术, 2017, 1(4): 89-92.
[7] 赵晓东 . 采用辊压机终粉磨工艺制备矿渣微粉作水泥混合材[J]. 水泥技术, 2017, 1(4): 64-66.
[8] 侯国锋, 张黎, 褚旭, 王复然, 石国平, 许芬. 辊压机终粉磨系统生产钢铁渣粉工艺设计及优化[J]. 水泥技术, 2017, 1(2): 45-48.
[9] 侯国锋. 辊压机终粉磨生产矿渣微粉的实践[J]. 水泥技术, 2015, 1(5): 48-49.
[10] 于浚哲, 滕延伟, 褚旭.
基于ANSYS Workbench的辊压机辊子过盈联接应力分析
[J]. 水泥技术, 2015, 1(3): 38-40.
[11] 王帅, 郝亮, 李洪. 小球磨配大辊压机的问题及解决措施[J]. 水泥技术, 2015, 1(1): 54-57.
[12] 牛海龙, 石国平, 谢小云, 马秀宽, 徐向升. ϕ3.8m×13m水泥粉磨系统的改造[J]. 水泥技术, 2014, 1(3): 78-80.
[13] 李桂超, 赵义兵, 马秀宽, 魏艳.
水泥磨增加辊压机的提产改造
[J]. 水泥技术, 2012, 1(4): 29-31.
[14] 李洪双.
辊压机用行星齿轮减速机扭矩支撑形式
[J]. 水泥技术, 2012, 1(4): 90-92.
[15] 王建武, 王守玲. ϕ3.2m×13m高细磨磨内结构的改进[J]. 水泥技术, 2012, 1(2): 32-33.
[1] . Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2] DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3] LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4] LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5] MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6] HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7] XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8] GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9] WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10] JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview