Please wait a minute...
水泥技术, 2015, 1(4): 28-31    
  实验研究 本期目录 | 过刊浏览 | 高级检索 |
三次风管摆动支撑体系的设计与应用
中材成都重型机械有限公司
Design and Application of Swing Support System for Tertiary Air Duct
Sinoma Chengdu Heavy Machinery Co., Ltd.
下载:  PDF (986KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 本文介绍了一种新的三次风管摆动支撑体系,从结构和原理以及相对于传统的滑动支撑体系的优点等几方面进行了阐述,并对其倾角、固定支座位置及支座载荷计算等设计问题进行了探讨。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
敬清海
关键词:  三次风管  摆动支撑  固定支座  摆动支座  二力杆    
Abstract: A new swing support system for tertiary air duct is introduced in this paper. This swing support system is described in terms of structure, principle and advantages compared with traditional sliding support system. In addition, dip angle, fixed support position and calculation of bearing load of this swing support system are also discussed in this paper.
Key words:  tertiary air duct    swing support    fixed support    two-force rod
收稿日期:  2015-04-23                出版日期:  2015-07-25      发布日期:  2018-05-24      整期出版日期:  2015-07-25
TQ172.622.29  
引用本文:    
敬清海. 三次风管摆动支撑体系的设计与应用[J]. 水泥技术, 2015, 1(4): 28-31.
JING Qinghai. Design and Application of Swing Support System for Tertiary Air Duct. Cement Technology, 2015, 1(4): 28-31.
链接本文:  
http://www.cemteck.com/CN/  或          http://www.cemteck.com/CN/Y2015/V1/I4/28
[1] 张凯, 厉惠良, 陶从喜, 彭学平. 分解炉三次风管结构优化研究[J]. 水泥技术, 2015, 1(3): 33-37.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview