高海拔地区水泥生产线技术诊断及优化

下载:

PDF (1964KB)
输出: BibTeX | EndNote (RIS)

摘要本文详细阐述了高海拔地区七条新型干法水泥生产线的运行状况、烧成系统配置及存在的问题，结合现场检测及优化调试结果，针对其瓶颈及不足之处提出了合理的优化建议及改造方案，改造后生产线烧成系统达到了更好的运行指标。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	武晓萍
	徐俊杰

关键词: 高海拔烧成系统诊断及优化

Abstract: In this paper, seven new dry process cement production lines at high altitude are introduced in detail. The operation conditions, configuration and problems of the Pyro system are also discussed. According to the bottleneck and insufficient points of the Pyro system, the optimized proposals and transformation schemes were put forward based on the measuring and commissioning results. After the modification, the production line Pyro system achieved a better operating index.

Key words: high altitude area firing system diagnosis and optimization

收稿日期: 2016-05-05 出版日期: 2017-01-25 发布日期: 2018-05-03 整期出版日期: 2017-01-25

TQ172.622.29

引用本文:

武晓萍, 徐俊杰. 高海拔地区水泥生产线技术诊断及优化[J]. 水泥技术, 2017, 1(1): 85-89.
WU Xiaoping, XU Junjie. Technical Diagnosis and Optimization of Cement Production Line in High Altitude Area. Cement Technology, 2017, 1(1): 85-89.

链接本文:

http://www.cemteck.com/CN/ 或 http://www.cemteck.com/CN/Y2017/V1/I1/85

[1]	邓荣娟. 回转窑大齿圈铸造质量及热处理工艺的研究 [J]. 水泥技术, 2018, 1(2): 36-38.
[2]	丛晓静, 许龙旭, 刘旭. 提高回转窑大型铸造齿圈质量的研究[J]. 水泥技术, 2018, 1(2): 39-42.
[3]	孙学成, 吴蕾, 陶瑛, 任鞠萍. 回转窑自适应托轮支承装置及啮合传动装置的研究[J]. 水泥技术, 2018, 1(2): 47-49.
[4]	马娇媚, 陶从喜, 彭学平, 陈昌华. 水泥窑脱硝工艺技术综合评价 [J]. 水泥技术, 2018, 1(2): 77-81.
[5]	丛晓静. 回转窑大小齿轮磨损原因分析及解决方案[J]. 水泥技术, 2017, 1(1): 60-63.
[6]	王新频, 吴小缓, 梁树峰, 赵娇, 王冬. 水泥窑协同处置城市生活垃圾的最佳实践（上）[J]. 水泥技术, 2017, 1(1): 71-75.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .