增湿塔在湿法脱硫上的应用实践

doi:10.19698/j.cnki.1001-6171.20211043

下载:

PDF (6711KB)
输出: BibTeX | EndNote (RIS)

摘要介绍了一种利用现有生产线增湿塔设备进行石灰湿法脱硫的技术改造方案。该方案可根据生料磨停机计划和SO₂排放情况灵活开启，投资少，脱硫效果明显。改造后，生料磨停机时的二氧化硫排放由原来的189~225mg/m³之间波动降至40~60mg/m³之间波动，未再出现过超标现象。投入使用两年来，未对增湿塔产生不利影响。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	郎济涵
	张滨

关键词: 生料磨二氧化硫增湿湿法脱硫

Abstract: This paper introduces a technical transformation scheme of lime wet desulfurization using existing humidification tower equipment of production line. The revamp can be opened flexibly according to the shutdown plan of raw mill and SO₂ emission, with less investment and obvious desulfurization effect. After the revamping, the sulfur dioxide emission of the raw mill decreased from 189~225mg/m³ to 40 ~60mg/m³ , and there was no environmental failure phenomenon according to the standard. In the past two years, the tower has not been adversely affected by the wet desulfurization.

Key words: raw mill SO₂ humidification tower wet desulfurization

收稿日期: 2020-04-28 出版日期: 2021-01-25 发布日期: 2021-02-04 整期出版日期: 2021-01-25

ZTFLH:

TQ172.622.29

引用本文:

郎济涵, 张滨.

增湿塔在湿法脱硫上的应用实践

[J]. 水泥技术, 2021, 1(1): 43-45.
LANG Jihan, ZHANG Bin. The Application Practice of Humidifying Tower for Wet Desulfurization. Cement Technology, 2021, 1(1): 43-45.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20211043 或 http://www.cemteck.com/CN/Y2021/V1/I1/43

[1]	于浩波, 罗振, 王爱琴. 湿法脱硫系统对窑尾烟囱的影响 [J]. 水泥技术, 2021, 1(2): 41-43.
[2]	王爱琴, 于浩波, 罗振, 李志军. 石灰石-石膏湿法烟气脱硫智能化控制系统 [J]. 水泥技术, 2020, 1(6): 30-32.
[3]	王春丽. 水泥窑尾烟气湿法脱硫工艺水平衡问题的探讨 [J]. 水泥技术, 2019, 1(6): 91-94.
[4]	罗振. 水泥窑石灰石-石膏湿法脱硫工艺介绍 [J]. 水泥技术, 2018, 1(4): 85-87.
[5]	贺孝一, 张明飞, 秦中华. 国外某1 000t/d项目风扫生料磨调试[J]. 水泥技术, 2017, 1(3): 36-38.
[6]	王孝伟. 减速机鼓形齿联接材料的选择 [J]. 水泥技术, 2014, 1(3): 42-46.
[7]	边汉民, 赵义兵, 马秀宽. 烘干中卸生料磨改造为水泥磨[J]. 水泥技术, 2012, 1(5): 25-27.
[8]	廖传华, 黄振仁. 喷雾增湿过程的数学模型[J]. 水泥技术, 2004, 1(4): 47-49.
[9]	周玲, 廖传华, 董金善. 增湿塔的改型设计[J]. 水泥技术, 2002, 1(6): 43-45.
[10]	张晓梅, 刘后启, 徐向红. 增湿塔湿底的原因及预防措施[J]. 水泥技术, 2001, 1(4): 21-23.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[8]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .