皮带输送机滚筒的包胶维护处理

doi:10.19698/j.cnki.1001-6171.20251041

下载:

PDF (4409KB)
输出: BibTeX | EndNote (RIS)

摘要水泥生产线皮带输送机滚筒的包胶磨损严重时，皮带输送机易出现打滑发热现象，严重时甚至引发燃烧等安全事故。滚筒包胶磨损后，若及时处理则可有效保护滚筒本体，节约维护成本。对比分析了热硫化和冷硫化两种包胶处理方法的工艺流程，冷硫化包胶工艺施工时间短、成本低，更适用于现场在线维修。以工程项目为例，介绍了冷硫化包胶工艺维修处理的前期准备、主要技术参数要求、施工处理步骤，提出了施工注意事项。维修处理后，有效提高了皮带输送机滚筒的使用寿命，显著降低了维护成本，减轻了工作人员的劳动强度。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	孙超
	刘静静
	朱鹏

关键词: 皮带输送机滚筒冷硫化包胶热硫化包胶维护维修

Abstract: The abrasive wear of the roller coating of belt conveyor will lead to slip and heat phenomenon, and even cause burning and other safety accidents. In this paper, it is analyzed that timely handling can protect the roller and save maintenance cost; comparing the process flow of hot vulcanization and cold vulcanization, the cold vulcanized gluing technique needs short construction time and low cost, is more suitable for on-site maintenance. Taking the engineering project as an example, the paper introduces the preparation, main technical parameter requirements and construction treatment steps of the cold vulcanized gluing technique, and puts forward the precautions of construction. After implementation, the service life of the belt conveyor roller is effectively improved, the maintenance cost is significantly reduced, and the work load of the staff is reduced.

Key words: the belt conveyor roller cold vulcanized gluing technique hot vulcanized gluing technology maintenance

收稿日期: 2024-08-12 出版日期: 2025-01-25 发布日期: 2025-01-25 整期出版日期: 2025-01-25

ZTFLH:

TQ172.687

引用本文:

孙超, 刘静静, 朱鹏. 皮带输送机滚筒的包胶维护处理[J]. 水泥技术, 2025, 1(1): 41-44.
SUN Chao, LIU Jingjing, ZHU Peng. Maintenance of the Roller Coating Wear of Belt Conveyor in Cement Production Line. Cement Technology, 2025, 1(1): 41-44.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20251041 或 http://www.cemteck.com/CN/Y2025/V1/I1/41

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .