Please wait a minute...
水泥技术, 2015, 1(3): 38-40    
  实验研究 本期目录 | 过刊浏览 | 高级检索 |
基于ANSYS Workbench的辊压机辊子过盈联接应力分析
1天津水泥工业设计研究院有限公司 2中材装备集团有限公司
Stress Analysis of Interference Fit of Roller for Roller Press Based  on  ANSYS  Workbench
1.Tianjin Cement Industry Design & Research Institute Co.,Ltd. 2.Sinoma Technology & Equipment Group Co., Ltd.
下载:  PDF (1828KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 对辊压机辊子进行运动及受力分析,采用厚壁圆筒模型计算辊轴和辊套配合过盈量的上、下限,运用ANSYS Workbench对不同过盈量下的过盈联接进行分析,得到了辊轴与辊套在过盈配合状态下的接触应力分布情况。将有限元计算结果与理论计算结果进行对比,验证了有限元分析结果的可靠性,为辊压机辊子过盈联接的设计提供了一种新途径。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
于浚哲
滕延伟
褚旭
关键词:  辊压机  过盈联接  ANSYS Workbench    
Abstract: This paper shows kinematics and force analysis of the roller for roller press. Contact stress distribution of roller and roller sleeve in the condition of interference fit was obtained using Tick-walled Tube Theorem to calculate upper and lower limits of interference fit between the roller and the roller sleeve and using ANSYS Workbench to analyze the interference fit under different interference conditions. Comparing finite element calculation results with theoretical solutions, we verified the feasibility of the finite element method. Accordingly a new approach is provided for interference fit design of roller press.
Key words:  roller press    interference fit    ANSYS workbench
收稿日期:  2014-09-04                出版日期:  2015-05-25      发布日期:  2018-05-23      整期出版日期:  2015-05-25
TH131.7  
引用本文:    
于浚哲, 滕延伟, 褚旭.
基于ANSYS Workbench的辊压机辊子过盈联接应力分析
[J]. 水泥技术, 2015, 1(3): 38-40.
YU Junzhe, TENG Yanwei, CHU Xu. Stress Analysis of Interference Fit of Roller for Roller Press Based  on  ANSYS  Workbench. Cement Technology, 2015, 1(3): 38-40.
链接本文:  
http://www.cemteck.com/CN/  或          http://www.cemteck.com/CN/Y2015/V1/I3/38
[1] 何毛, 王小峰, 石国平. 轻质物料较粗成品的辊压及干式分选试验探索[J]. 水泥技术, 2018, 1(3): 30-33.
[2] 肖静, 曹凯, 贺孝一.
磨内结构对水泥流动度的影响
[J]. 水泥技术, 2018, 1(3): 77-79.
[3] 朱守刚. 辊压机循环物料钢丝胶带提升机的应用[J]. 水泥技术, 2017, 1(6): 61-63.
[4] 侯龙华, 柴星腾, 贺孝一. 水泥辊压机预粉磨系统电耗评价探讨[J]. 水泥技术, 2017, 1(5): 19-24.
[5] 王振生. 生料中卸球磨粉磨系统改为辊压机终粉磨系统的方案对比[J]. 水泥技术, 2017, 1(5): 39-40.
[6] 张峰亮. 5 000t/d熟料生产线生料粉磨系统改造[J]. 水泥技术, 2017, 1(4): 89-92.
[7] 赵晓东 . 采用辊压机终粉磨工艺制备矿渣微粉作水泥混合材[J]. 水泥技术, 2017, 1(4): 64-66.
[8] 侯国锋, 张黎, 褚旭, 王复然, 石国平, 许芬. 辊压机终粉磨系统生产钢铁渣粉工艺设计及优化[J]. 水泥技术, 2017, 1(2): 45-48.
[9] 王帅, 郝亮, 李洪. 小球磨配大辊压机的问题及解决措施[J]. 水泥技术, 2015, 1(1): 54-57.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview