Please wait a minute...
水泥技术, 2017, 1(3): 27-29    
  实验研究 本期目录 | 过刊浏览 | 高级检索 |
一种针对高温腐蚀工况的新型耐热钢的研究
中材装备集团有限公司
Investigation of New Type Heat-resistant Steel for High Temperature Corrosion Conditions
Sinoma technology & equipment group Co., Ltd.
下载:  PDF (1222KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 本文介绍了一种针对高温腐蚀工况的新型耐热钢TRG-ZA-10。传统的Cr-Ni奥氏体耐热钢,以ZG40Cr25Ni20Si2为代表,具有良好的高温抗氧化性能和热强性能,但在硫化物和氯化物浓度较高(尤其是氯化物)的高温工况中,其使用寿命急剧下降,不能满足使用要求,因此需要一款专门针对高温腐蚀工况的新型材料以解决该问题。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
刘旭
孙建
邓荣娟
向东湖
关键词:  高温腐蚀  硫化物  氯化物  耐热钢    
Abstract: This paper introduces a new type of heat-resistant steel TRG-ZA-10 for high temperature corrosion conditions. The traditional Cr-Ni austenitic heat-resistant steel represented by ZG40Cr25Ni20Si2 has high temperature oxidation resistance and good thermal strength performance, but when at high temperature conditions with higher sulfides and chlorides (especially chlorides) concentration the service life of steel declines sharply, which was not able to meet the requirements. So a specialized new material using at high temperature corrosion condition is required to be developed to solve the problem.
Key words:  high temperature corrosion    sulfide    chloride    heat-resistant steel
收稿日期:  2016-10-13                出版日期:  2017-05-25      发布日期:  2018-05-03      整期出版日期:  2017-05-25
TG142.73  
引用本文:    
刘旭, 孙建, 邓荣娟, 向东湖. 一种针对高温腐蚀工况的新型耐热钢的研究[J]. 水泥技术, 2017, 1(3): 27-29.
LIU Xu, SUN Jian, DENG RongJuan, XIANG DongHu. Investigation of New Type Heat-resistant Steel for High Temperature Corrosion Conditions. Cement Technology, 2017, 1(3): 27-29.
链接本文:  
http://www.cemteck.com/CN/  或          http://www.cemteck.com/CN/Y2017/V1/I3/27
No related articles found!
[1] . Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2] DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3] LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4] LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5] MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6] HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7] XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8] WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9] JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10] ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview