,"/> 浅谈激光粒度分析仪数据处理
Please wait a minute...
水泥技术, 2022, 1(5): 77-81    doi: 10.19698/j.cnki.1001-6171.20225077
  生产技术 本期目录 | 过刊浏览 | 高级检索 |
浅谈激光粒度分析仪数据处理
1 中建材(合肥)粉体科技装备有限公司,安徽  合肥  230051; 2 浙江新都水泥有限公司,浙江  嘉兴  314511
Overview of Data Processing of the Laser Granularity Analyzer
1. CNBM (Hefei) Powder Technology Equipment Co., Ltd. , Anhui Hefei 230051, China;
2. Zhejiang Xindu Cement Co., Ltd. , Jiaxing Zhejiang, 314511, China 
下载:  PDF (1734KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 
分析了在线激光粒度分析仪实时检测水泥样品粒度值的运行原理,对比了在线激光粒度分析仪和化验室对同一入库水泥样品细度检测数据之间的差异,通过采用固定线性校正方法,可对检测数据进行短时校正,但随着时间的延长,校正效果会越来越差。采用动态迭代线性校正方法后,有效减小了在线激光粒度分析仪与化验室检测数据之间的偏差,提高了在线激光粒度分析仪检测结果的准确性和置信度。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
范宗民
黄建国
关键词:  在线激光粒度分析仪  固定线性校正方法  动态校正算法  偏差值    
Abstract: The operation principle of the online laser particle size analyzer for real-time detection of cement sample particle size value is analyzed, and the difference between online laser particle size analyzer and laboratory data on the fineness of the same cement sample is compared. By using the fixed linear correction method, the test data can be corrected for a short time, but with the extension of time, correction of the effect will be worse and worse.After using the dynamic iterative linear correction method, the deviation between the online laser particle size analyzer and the laboratory test data is effectively reduced, and the accuracy and confidence of the online laser particle size analyzer detection results are improved.
Key words:  on line laser granularity analyzer    fixed linear correction method    dynamic correction algorithm    ')" href="#">value of deviation
收稿日期:  2021-12-29      修回日期:  2022-09-25           出版日期:  2022-09-25      发布日期:  2022-09-25      整期出版日期:  2022-09-25
ZTFLH:  TQ172.16   
     
引用本文:    
范宗民, 黄建国. 浅谈激光粒度分析仪数据处理[J]. 水泥技术, 2022, 1(5): 77-81.
FAN Zongmin, HUANG Jianguo. Overview of Data Processing of the Laser Granularity Analyzer. Cement Technology, 2022, 1(5): 77-81.
链接本文:  
http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20225077  或          http://www.cemteck.com/CN/Y2022/V1/I5/77
[1] 邝国乾. 28d抗压强度检测结果的不确定度评定[J]. 水泥技术, 2004, 1(5): 93-95.
[1] . Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2] DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3] LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4] LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5] MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6] HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7] XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8] GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9] WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10] JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview