Please wait a minute...
水泥技术, 2024, 1(1): 74-77    doi: 10.19698/j.cnki.1001-6171.20241074
  工程设计 本期目录 | 过刊浏览 | 高级检索 |
电气设备抗震设计规范及水泥工程管线桥架抗震设计分析
天津水泥工业设计研究院有限公司,天津  300400
Analysis of the Code for Electrical Equipment Seismic Design and Seismic Bracing Using in Cement Project
Tianjin Cement Industry Design & Research Institute Co., Ltd. , Tianjin 300400, China
下载:  PDF (1603KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 分析了国内外现行电气设备抗震设计相关标准规范,分析了水泥工程中常用的不同型号的电气配管、母线槽、电缆桥架是否需作抗震设防设计,提出了抗震支吊架设计使用注意事项,利用Revit软件制作了抗震支吊架族模型,以满足水泥工程总承包项目抗震设防需求。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
张煜
向峥
关键词:  抗震设计  抗震支吊架  抗震设计标准  三维设计    
Abstract: It studies the domestic and foreign standards for seismic design, and analyzes the seismic design for the electrical equipment, such as the pipes, busbar and cable tray in the cement project. It introduces some points for attention in seismic bracing using, makes the seismic bracing family model with revit software to meet the seismic fortification requirements of cement engineering EPC project.
Key words:  seismic design    seismic bracing    standards for seismic design    3D design
收稿日期:  2023-08-04                出版日期:  2024-01-25      发布日期:  2024-01-23      整期出版日期:  2024-01-25
ZTFLH:  TU352.1  
引用本文:    
张煜, 向峥. 电气设备抗震设计规范及水泥工程管线桥架抗震设计分析[J]. 水泥技术, 2024, 1(1): 74-77.
ZHANG Yu, XIANG Zheng. Analysis of the Code for Electrical Equipment Seismic Design and Seismic Bracing Using in Cement Project. Cement Technology, 2024, 1(1): 74-77.
链接本文:  
http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20241074  或          http://www.cemteck.com/CN/Y2024/V1/I1/74
[1] 王爱琴, 罗振, 于浩波. 水泥湿法脱硫项目建设新技术与管理新模式[J]. 水泥技术, 2023, 1(5): 38-42.
[2] 宁波, 肖胜星. 基于solid edge脱硫系统管路设计的新思路及应用[J]. 水泥技术, 2019, 1(4): 79-82.
[3] 李俊义, 吴灵宇, 胡亚东.
中美标准地震反应谱对比分析
[J]. 水泥技术, 2018, 1(4): 37-41.
[4] 李俊, 闫羽, 相冲.
DTⅡ型胶带输送机三维设计软件的开发与应用
[J]. 水泥技术, 2018, 1(4): 45-48.
[5] 赵翔, 鲁承桂, 邢利伟, 朴志友.
基于Surpac的水泥矿山三维建模与设计
[J]. 水泥技术, 2014, 1(1): 93-96.
[6] 相冲, 郭天代, 陈刚, 刘晔.
三维设计方法在水泥工厂设计中的应用
[J]. 水泥技术, 2009, 1(6): 27-30.
[1] . Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2] DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3] LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4] LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5] MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6] HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7] XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8] GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9] WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10] JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview