螺旋输送机回转叶片的现场计算

下载:

PDF (667KB)
输出: BibTeX | EndNote (RIS)

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	邹建田
	于英鳌

收稿日期: 2017-04-06 出版日期: 2017-11-25 发布日期: 2018-05-09 整期出版日期: 2017-11-25

TQ172.687

引用本文:

邹建田, 于英鳌. 螺旋输送机回转叶片的现场计算[J]. 水泥技术, 2017, 1(6): 91-92.
ZOU Jiantian, YU Yingao. Local Calculation of Rotary Blade of the Screw Conveyer. Cement Technology, 2017, 1(6): 91-92.

链接本文:

http://www.cemteck.com/CN/ 或 http://www.cemteck.com/CN/Y2017/V1/I6/91

[1]	林仁章, 史嘉耿. 中材国际DANGOTE项目一体化长皮带机介绍[J]. 水泥技术, 2018, 1(2): 50-55.
[2]	孟令举. 多点卸料机的改造[J]. 水泥技术, 2018, 1(1): 103-104.
[3]	朱守刚. 辊压机循环物料钢丝胶带提升机的应用[J]. 水泥技术, 2017, 1(6): 61-63.
[4]	张维宁, 张卫林. 粉流掣在水泥库定量控制的良好实践[J]. 水泥技术, 2017, 1(3): 43-45.
[5]	吴卫国. 降低重力式卸料板链提升机返料量的探讨[J]. 水泥技术, 2017, 1(3): 33-35.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .