Please wait a minute...
水泥技术, 2019, 1(2): 44-47    doi: 10.19698/j.cnki.1001-6171.20192044
  装备技术 本期目录 | 过刊浏览 | 高级检索 |
高效节能循环风机在ATOX生料磨系统中的应用
莒县中联水泥有限公司
The Practical Application of High Efficiency and Energy Saving Circulating Fan in ATOX Raw Mill
China United Cement Juxian Co., Ltd.
下载:  PDF (3352KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 ATOX50生料磨采用三风机工艺系统,配套的循环风机装机功率为3 800kW,其气动效率较低,导致循环风机电耗较高。实际运行中,基本是满负荷运行,成为水泥熟料生产中能耗最高的生产环节,因此,经实际调查研究之后,决定采用高效节能风机对循环风机实施整机更换,做到既满足现有生产的要求,又兼顾极限产能的发挥,改造后风机内部漏风大幅减少,进出口管道阻力降低,整机效率大幅提高。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
赵小雷
关键词:  高效节能风机  集流器  节能降耗    
Abstract: The ATOX50 raw material mill adopts the three-fans process system, and the supporting circulating fan installed power is 3 800kW, and its aerodynamic efficiency is low, resulting in relatively high power consumption of the circulating fan. In actual operation, it is basically full-load operation and becomes the most energy-consuming production process unit in cement clinker production. Therefore, after actual investigation and research, it is decided to adopt high-efficiency energy-saving fan to replace the circulating fan with the whole machine, so as to satisfy the existing production. The requirements also take into account the extreme production capacity. After the transformation, the air leakage inside the fan is greatly reduced, the resistance of the inlet and outlet pipes is reduced, and the efficiency of the whole machine is greatly improved.
Key words:  energy efficient fan    current collector    energy saving
收稿日期:  2018-09-14                出版日期:  2019-03-25      发布日期:  2019-04-26      整期出版日期:  2019-03-25
ZTFLH:  TQ172.632.5  
引用本文:    
赵小雷. 高效节能循环风机在ATOX生料磨系统中的应用[J]. 水泥技术, 2019, 1(2): 44-47.
ZHAO Xiaolei. The Practical Application of High Efficiency and Energy Saving Circulating Fan in ATOX Raw Mill. Cement Technology, 2019, 1(2): 44-47.
链接本文:  
http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20192044  或          http://www.cemteck.com/CN/Y2019/V1/I2/44
[1] 蔡晓亮, 刘传胜, 丁再珍, 赵剑波, 陈心自, 高云详, 王倩.
TRMS60.3矿渣辊磨的技术特点及应用
[J]. 水泥技术, 2019, 1(3): 40-44.
[2] 马娇媚, 陶从喜, 狄东仁.
新型干法水泥窑系统㶲平衡研究
[J]. 水泥技术, 2018, 1(5): 21-25.
[3] 狄东仁, 陶从喜, 柴星腾. 水泥能耗标准的修订与节能降耗技术(上)[J]. 水泥技术, 2018, 1(1): 22-26.
[4] 蔡晓亮, 赵剑波, 宋留庆, 王倩, 崔军利. TRMS56.3矿渣辊磨的特点及现场使用[J]. 水泥技术, 2017, 1(5): 49-52.
[5] 刘贵新, 陈昌华, 陶从喜, 彭学平, 李亮.
带SLC分解炉的4 000t/d熟料生产线烧成系统技术优化
[J]. 水泥技术, 2016, 1(5): 87-90.
[6] 王靖, 艾军, 魏灿, 朱金波. 水泥智能优化控制系统的应用研究[J]. 水泥技术, 2016, 1(2): 31-34.
[7] 韩立杨.
浅析水泥易烧性的研究对水泥生产节能降耗的意义
[J]. 水泥技术, 2015, 1(3): 28-32.
[8] 刘瑞芝, 陈新智, 李霞.
燃煤催化剂对混煤催化燃烧的研究与应用
[J]. 水泥技术, 2013, 1(4): 27-30.
[9] 闫光启, 杨勇伟, 王立, 万朋, 潘世全, 王琳琳, 栗克, 高国防.
空压机变频改造节能效果分析
[J]. 水泥技术, 2013, 1(1): 96-98.
[10] 王敏. 风扫磨增产降耗的技术措施[J]. 水泥技术, 2008, 1(1): 65-66.
[11] 吴 红. 湿法回转窑节能降耗的措施[J]. 水泥技术, 2002, 1(4): 54-56.
[1] CONG Xiaojing, XU Longxu, LIU Xu. Study on Improving Quality of Rotary Kiln Casting Girth Gear[J]. Cement Technology, 2018, 1(2): 39 -42 .
[2] LIN Renzhang, SHI Jiageng. Introduction of the Integrated Long Belt Conveyor in Sinoma DANGOTE Project[J]. Cement Technology, 2018, 1(2): 50 -55 .
[3] WU Qiusheng, YAO Piqiang, YU Weimin, HAN Hui, TAN Yongquan, FAN Zhiyong, YU Zhijun, HUANG Qian. Study  on  the  Properties  of  Concrete  Mixed  with  High  Performance  Belite  Sulphoaluminate  Cement[J]. Cement Technology, 2017, 1(1): 19 -24 .
[4] LI Hongyu. Development of Post - processing Program of Concrete Frame Structure Suitable for Chinese, American and European Standard[J]. Cement Technology, 2017, 1(1): 64 -66 .
[5] MA Bin, SUN Libo, ZHANG Xu, CHANG Liang, LI Pengfei. Research on Purchasing Management Strategy of Building Materials Equipments Group Manufacturing Enterprises and its System Application[J]. Cement Technology, 2017, 1(1): 79 -83 .
[6] ZHANG Jing, ZHANG Ping. Design Essentials of the Fire Pump Station of Technical Code for Fire Protection Water Supply and Hydrant Systems[J]. Cement Technology, 2017, 1(3): 48 -51 .
[7] MA Jioamei, LIU Fang, GUO Tiandai, TAO Congxi, PENG Xueping. Development and Application of 5 500t/d Pyro-system with 6-stage Preheater[J]. Cement Technology, 2017, 1(4): 22 -25 .
[8] MA Huilai, ZHAO Jianbo, CHEN Zhifeng, LI Jing, QIN Jingping. Application of On-line Monitoring System in Large Roller Mill[J]. Cement Technology, 2017, 1(4): 26 -30 .
[9] LIU Chen, ZHENG Xu, WANG Xin, DU Yong, YAN Bilan, LIN Zongshou, WEI Liying. Study on SO3 Dissolution of Persulfate Phosphogypsum Slag Cement Slurry[J]. Cement Technology, 2017, 1(4): 36 -43 .
[10] LIU Xu, XIANG Donghu, CHEN Xuyong. Study on the Casting Technique of Precision Casting (Lost Wax Casting)[J]. Cement Technology, 2017, 1(5): 44 -46 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview