新型轴向定位管磨机的研发与应用

doi:10.19698/j.cnki.1001-6171.20194024

下载:

PDF (5931KB)
输出: BibTeX | EndNote (RIS)

摘要针对管磨机定位夹板磨损过快的问题，研发了一种带有新型轴向定位的管磨机。新型轴向定位装置主要通过定位法兰对磨机进行轴向定位，可在一定范围内增大夹板的受力面积，同时通过强制润滑，减小夹板的磨损。通过计算核验及应用实践证明，该结构能够大大改善定位夹板的磨损情况，经一年多运行，效果良好。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	任鞠萍
	王国民

关键词: 轴向定位装置磨机监测管磨机

Abstract: Aiming at the problem of abrasion of positioning splint of tube mill, a new type of tube mill with axial positioning was developed. The new type of axial positioning device mainly locates the mill axially by positioning flange, which can increase the force area of the splint in a certain range, and reduce the wear of the splint by forced lubrication. Through calculation, verification and application practice, it is proved that the structure can greatly improve the wear condition of the positioning splint. After more than one year's operation, the effect is good.

Key words: axial positioning device mill monitoring tube mill

收稿日期: 2019-04-26 出版日期: 2019-07-25 发布日期: 2019-08-15 整期出版日期: 2019-07-25

ZTFLH:

TQ172.632.1

引用本文:

任鞠萍, 王国民.

新型轴向定位管磨机的研发与应用

[J]. 水泥技术, 2019, 1(4): 24-28.
REN Juping , WANG Guomin. Development and Application of New Type Tube Mill with Axial Positioning . Cement Technology, 2019, 1(4): 24-28.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20194024 或 http://www.cemteck.com/CN/Y2019/V1/I4/24

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .