水泥预热器混凝土框剪结构工程设计与施工研究

doi:10.19698/j.cnki.1001-6171.20203038

下载:

PDF (4362KB)
输出: BibTeX | EndNote (RIS)

摘要分析了当前高层施工工法，结合预热器结构特点，确定了预热器结构的施工工法。介绍了预热器框剪结构施工方案的论证及开发定型过程，通过引入爬模施工工艺，研发专用施工设备，形成了适用于水泥项目特色的框架梁施工工法。新工法大幅降低了项目的整体投入，安全性能大幅提升，提高了施工效率。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	孙小永
	迟大亮
	陶瑛
	李明
	王晖

关键词: 混凝土结构施工工法爬模施工框架梁施工

Abstract: This paper analyzes the current tall building construction methods. According to the structural characteristics of the preheater, the construction method of the preheater structure is determined. It introduces the demonstration, development and stereotyping of process of the preheater frame-shear structure construction method. Through the introduction of climbing formwork construction technology and the research of special construction equipment, a frame beam construction method suitable for the characteristics of cement projects has been formed. The new construction method greatly reduces the overall investment of the project, the safety is greatly improved, and the construction efficiency is improved.

Key words: concrete structure construction method climbing formwork construction frame beam construction

收稿日期: 2020-03-18 出版日期: 2020-07-25 发布日期: 2020-07-27 整期出版日期: 2020-07-25

ZTFLH:

TU755.22

引用本文:

孙小永, 迟大亮, 陶瑛, 李明, 王晖.

水泥预热器混凝土框剪结构工程设计与施工研究

[J]. 水泥技术, 2020, 1(4): 38-44.
SUN Xiaoyong, CHI Daliang, TAO Ying, LI Ming, WANG Hui.

Engineering Design and Construction Research of Concrete Frame and Shear Structure of Cement Preheater

. Cement Technology, 2020, 1(4): 38-44.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20203038 或 http://www.cemteck.com/CN/Y2020/V1/I4/38

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .