ETAP软件在工厂低压大功率电动机起动校验方面的应用分析

下载:

PDF (2085KB)
输出: BibTeX | EndNote (RIS)

摘要在工厂供配电设计时，大功率电动机是否采用软起动、变压器容量如何满足大功率电动机起动的问题往往困扰设计者，设计方案的选择需要大量手工计算才能确定。本文使用ETAP软件对大功率电动机起动建立了典型电动机起动模型，通过调整模型参数即可校验不同功率电动机在何种情况下采用何种起动方式能满足电压降的要求，最终形成了一个速查表，体现了ETAP软件电动机起动模块的便捷性、高效性和准确性。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	刘森
	汪洋
	李思
	田哲

关键词: ETAP软件电动机起动电压降

收稿日期: 2017-10-12 出版日期: 2018-05-25 发布日期: 2018-05-25 整期出版日期: 2018-05-25

TP309

引用本文:

刘森, 汪洋, 李思, 田哲.

ETAP软件在工厂低压大功率电动机起动校验方面的应用分析

[J]. 水泥技术, 2018, 1(3): 38-41.
LIU Sen, WANG Yang, LI Si, TIAN Zhe.

Application Analysis of ETAP Software in Startup Calibration of Low Voltage and High Power Motor in Factory

. Cement Technology, 2018, 1(3): 38-41.

链接本文:

http://www.cemteck.com/CN/ 或 http://www.cemteck.com/CN/Y2018/V1/I3/38

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .