长距离带式输送机的初步设计选型

doi:10.19698/j.cnki.1001-6171.20222023

下载:

PDF (1726KB)
输出: BibTeX | EndNote (RIS)

摘要

介绍了长距离带式输送机前期方案设计阶段中设计输送量、理论横截面积、倾斜缩减系数、水平转弯系数等参数的计算方法。结合具体项目现场踏勘结果，对项目的设计输送量、带速、带宽等主要设计参数进行了计算，初步确定了输送设备选型方法，为详细设计阶段奠定了基础。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	赵翔
	王荣
	汪瑞敏
	吕亚伟

关键词: 带式输送机前期方案设计选型计算

Abstract:

The calculation methods of parameters such as design conveying capacity, theoretical cross-sectional area, inclination reduction coefficient, horizontal turning coefficient and other parameters in the preliminary design stage of long-distance belt conveyor were introduced. Combined with the site survey results of a specific project, the main design parameters such as the design conveying capacity, belt speed, and bandwidth of a certain project were calculated, and the selection of conveying equipment was preliminarily determined, which lays a foundation for the detailed design stage.

Key words: belt conveyor pre-project design selection and calculation

收稿日期: 2021-08-25 出版日期: 2022-03-25 发布日期: 2022-03-25 整期出版日期: 2022-03-25

ZTFLH:

TQ172.687

引用本文:

赵翔, 王荣, 汪瑞敏, 吕亚伟. 长距离带式输送机的初步设计选型[J]. 水泥技术, 2022, 1(2): 23-27.
ZHAO Xiang, WANG Rong, WANG Ruimin, LV Yawei. The Scheme Design of Long Distance Belt Conveyor in Pre-project Phase. Cement Technology, 2022, 1(2): 23-27.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20222023 或 http://www.cemteck.com/CN/Y2022/V1/I2/23

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .