胶带输送机清扫装置的改进

doi:10.19698/j.cnki.1001-6171.20223031

下载:

PDF (3168KB)
输出: BibTeX | EndNote (RIS)

摘要

介绍了胶带输送机传统刮板式清扫装置的结构特点及其使用缺陷，分析了细小物料粘附的原因，提出了增加气力清扫装置等改进措施。通过增设鼓风机、调整导向气管位置和改进开孔等，达到了预期清扫效果。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	刘磊
	张中华
	轩永行

关键词: 清扫装置细小物料静电吸附气力清扫

Abstract:

The structural characteristics and defects of traditional scraper cleaning device of belt conveyor are introduced, the reason of adhesion of fine material was analyzed, the improvement measures such as adding pneumatic cleaning device are put forward. By adding blower, adjusting the position of guide pipe and improving the opening, the expected cleaning effect is achieved.

Key words: cleaning device tiny material electrostatic adsorption pneumatic cleaning')" href="#"> pneumatic cleaning

收稿日期: 2021-09-06 修回日期: 2022-05-25 出版日期: 2022-05-25 发布日期: 2022-05-25 整期出版日期: 2022-05-25

ZTFLH:

TQ172.637

引用本文:

刘磊, 张中华, 轩永行. 胶带输送机清扫装置的改进[J]. 水泥技术, 2022, 1(3): 31-34.
LIU Lei, ZHANG Zhonghua, XUAN Yonghang. Improvement of Belt Conveyor Cleaning Device. Cement Technology, 2022, 1(3): 31-34.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20223031 或 http://www.cemteck.com/CN/Y2022/V1/I3/31

[1]	任连仓, 何岁科, 王海波. ϕ3.2m×13m水泥磨节能降耗措施[J]. 水泥技术, 2014, 1(4): 97-97.
[2]	冯蕾, 王政, 李家和, 张玉珍. 粉磨工艺对水泥性能影响的研究[J]. 水泥技术, 2004, 1(6): 49-51.
[3]	符泉. 提高生料粉磨产质量的几点措施[J]. 水泥技术, 2003, 1(4): 58-59.
[4]	瞿红林, 伊剑锋, 陈凡军. 改造选粉机提高磨机产质量 [J]. 水泥技术, 2003, 1(2): 47-49.
[5]	刘明红. 生料磨取消烘干仓后台时产量的分析 [J]. 水泥技术, 2002, 1(6): 77-78.
[6]	尹大树. 提高Φ2.6m×13m生料磨产量的途径[J]. 水泥技术, 2002, 1(增刊): 33-34.
[7]	王安顺. 优化工艺参数提高磨机产量[J]. 水泥技术, 2002, 1(2): 61-62.
[8]	张承印. 影响半终粉磨系统产量的因素简析[J]. 水泥技术, 2001, 1(3): 30-31.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .