大型管磨机驱动装置的选择及优缺点分析

doi:10.19698/j.cnki.1001-6171.20243020

下载:

PDF (5337KB)
输出: BibTeX | EndNote (RIS)

摘要大型管磨机本体及研磨体载荷大，磨机功率高，当其驱动装置采用行星减速机和齿形联轴器配合的中心传动方式时，会产生较大的轴向力，影响磨机的稳定可靠运行。分析对比了大型管磨机驱动装置采用中心传动、单边缘传动、单边缘双传动、双边缘传动、多点边缘传动等传动方式的工艺特点。以某项目?5.2m大型水泥管磨机2×4 000kW双边缘传动系统为例，介绍了主电机、减速机、大齿圈和小齿轮的选型设计计算及双边缘传动系统的实际应用情况。生产实践表明，大型管磨机选择双边缘传动方式安装方便、成本低、传动功率大、运行稳定可靠，是优选方案。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	王国民

关键词: 管磨机联轴器轴向力传动功率传动方式

Abstract: The main body and grinding body of a large tube mill have a large load and high grinding power. When its driving device adopts a central transmission method of planetary reducer and toothed coupling, it will generate significant axial force, which affects the stable and reliable operation of the mill. The process characteristics of large tube mill drive devices using central drive, single edge drive, single edge dual drive, dual edge drive, multi-point edge drive, and other driving methods are analyzed and compared. A certain project of the a ?5.2m large tube mill with 2×4 000kW double edge transmission system taken as an example, this paper introduces the selection, design and calculation of the main motor, reducer, girth gear, and pinion, as well as the practical application of the double edge transmission system. Production practice has shown that choosing the double edge drive method for large tube mills is a preferred solution due to its convenient installation, low cost, high transmission power, and stable and reliable operation.

Key words: tube mill coupling axial force drive power drive method

收稿日期: 2023-08-30 出版日期: 2024-05-25 发布日期: 2024-05-21 整期出版日期: 2024-05-25

ZTFLH:

TQ172.632.1

引用本文:

王国民. 大型管磨机驱动装置的选择及优缺点分析[J]. 水泥技术, 2024, 1(3): 20-26.
WANG Guomin. Selection and Analysis of Advantages and Disadvantages of Driving Devices for Large Tube Mills. Cement Technology, 2024, 1(3): 20-26.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20243020 或 http://www.cemteck.com/CN/Y2024/V1/I3/20

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[5]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[6]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[7]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[8]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .