Please wait a minute...
水泥技术, 2011, 1(3): 34-37    
  设计与研究 本期目录 | 过刊浏览 | 高级检索 |
低温陶瓷改性磷石膏生产建筑砖的工艺研究
昆明理工大学化学工程学院
Process Research of Producing Building Bricks from Low-temperature Ceramics Modified Phosphogypsum
School of Chemistry Engineering, Kunming University of Science and Technology
下载:  PDF (2277KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 研究了改性磷石膏生产建筑砖的工艺最佳物料配比。通过复合胶凝材料对磷石膏低温陶瓷化,首先由正交试验得到复合胶凝材料中最优DSZ:FMH:KZ为1:1:1,然后得到了最优磷石膏:复合胶凝材料为1:1,最后在固定磷石膏50%的前提下,由单因素试验优化得到DSZ、FMH、KZ的最佳掺量分别为12%、18%、20%,最佳养护时间是20h。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
陆占清
夏举佩
张召述
朱丽苹
关键词:  磷石膏  胶凝材料  陶瓷  工艺    
Abstract: The optimal proportion in the process of producing building brick from modified phosphogypsum was studied. Through the low-temperature ceramics modification of phosphogypsum using composite cementitious material, the optimal proportion for DSZ: FMH: KZ is obtained to be 1:1:1 with orthogonal experiments firstly. Then the best ratio of phosphogypsum to composite cementitious material is 1:1. Lastly with the constant phosphogypsum content of 50%, the best content of DSZ, FMH and KZ is 12%, 18% and 20% respectively and the best curing time is 20 h through single factor experiments. 
Key words:  Phosphogypsum    Cementitious materials    Ceramics    Process
收稿日期:  2010-10-09                出版日期:  2011-05-25      发布日期:  2018-06-15      整期出版日期:  2011-05-25
TQ172.462  
引用本文:    
陆占清, 夏举佩, 张召述, 朱丽苹.
低温陶瓷改性磷石膏生产建筑砖的工艺研究
[J]. 水泥技术, 2011, 1(3): 34-37.
LU Zhanqing, XIA Jupei, ZHANG Zhaoshu, ZHU Liping.
Process Research of Producing Building Bricks from Low-temperature Ceramics Modified Phosphogypsum
. Cement Technology, 2011, 1(3): 34-37.
链接本文:  
http://www.cemteck.com/CN/  或          http://www.cemteck.com/CN/Y2011/V1/I3/34
[1] 郭天代, 王秀龙, 孔庆森. 基于粘湿物料流动函数的喂料仓工艺设计[J]. 水泥技术, 2018, 1(3): 23-29.
[2] 徐元元.
TRMS45.2矿渣辊磨的工作原理及调试
[J]. 水泥技术, 2018, 1(2): 43-46.
[3] 蔡晓亮, 赵剑波, 宋留庆, 王倩, 崔军利. TRMS56.3矿渣辊磨的特点及现场使用[J]. 水泥技术, 2017, 1(5): 49-52.
[4] 李维兴. 水泥半终粉磨系统的优化和质量改善[J]. 水泥技术, 2017, 1(5): 56-60.
[5] 刘晨, 郑旭, 王昕, 杜勇, 颜碧兰, 林宗寿, 魏丽颖. 过硫磷石膏矿渣水泥浆SO3溶出性能研究[J]. 水泥技术, 2017, 1(4): 36-43.
[6] 邓荣娟. 大型铸件轮带的质量和工艺研究[J]. 水泥技术, 2017, 1(4): 49-52.
[7] 侯国锋, 张黎, 褚旭, 王复然, 石国平, 许芬. 辊压机终粉磨系统生产钢铁渣粉工艺设计及优化[J]. 水泥技术, 2017, 1(2): 45-48.
[8] 刘秀君, 叶华君. 数值模拟在盘体工艺优化中的应用[J]. 水泥技术, 2017, 1(1): 39-42.
[9] 邓建新, 王卫德. 浅谈回转窑振动原因及调整方法[J]. 水泥技术, 2016, 1(5): 51-53.
[10] 张爱全. 钢渣性能及其在水泥中的应用研究[J]. 水泥技术, 2016, 1(5): 35-39.
[11] 董艳超, 周建, 杨松. 篦冷机连接板加工工艺改进[J]. 水泥技术, 2016, 1(3): 81-83.
[12] 王飞. 提升机料斗制作工艺改进[J]. 水泥技术, 2016, 1(3): 84-85.
[13] 鞠召会, 张黎, 褚旭. 陶瓷抛光污泥立式烘干分级系统的应用[J]. 水泥技术, 2016, 1(1): 32-34.
[14] 石光, 刘箴, 聂文海, 宋留庆, 徐昕.
辊磨在铅锌尾矿渣综合利用中的应用
[J]. 水泥技术, 2015, 1(3): 45-48.
[15] 王烨, 贾长付, 褚旭, 许芬.
动静态空气筛分机的结构设计及应用
[J]. 水泥技术, 2014, 1(6): 75-77.
No Suggested Reading articles found!
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview