回转窑的调测方法

doi:10.19698/j.cnki.1001-6171.20211031

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (2325KB)
输出: BibTeX | EndNote (RIS)

摘要对回转窑进行检修后，因原有配件存在不同程度的磨损，开机后大齿圈出现振动，需停窑进行调整。根据测得的回转窑各档标高、大齿圈各项数据，对回转窑进行了调整，调整后，回转窑运行平稳，小齿轮轴向、水平、垂直三个方向的振动值均≯2.5mm，各档托轮瓦温稳定在38~43℃之间。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	赵鑫磊

关键词: 回转窑大齿圈小齿轮齿顶隙

Abstract: After the rotary kiln is overhauled, the original fittings are worn to varying degrees, and the big gear ring vibrates after starting, so the kiln requires to be stopped for adjustment. According to the measured data of each gear elevation and big gear ring, the rotary kiln is adjusted. After adjustment, the rotary kiln runs smoothly, the vibration values of the pinion in axial, horizontal and vertical directions are all ≯2.5mm, and the temperature of the roller shoe in each gear is stable between 38℃ and 43℃.

Key words: rotary kiln big gear ring pinion gear tip clearance

收稿日期: 2020-04-14 出版日期: 2021-01-25 发布日期: 2021-02-04 整期出版日期: 2021-01-25

ZTFLH:

TQ172.622.29

引用本文:

赵鑫磊. 回转窑的调测方法[J]. 水泥技术, 2021, 1(1): 31-33.
ZHAO Xinlei. Kiln Measuring and Adjusting Method for Rotary Kiln. Cement Technology, 2021, 1(1): 31-33.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20211031 或 http://www.cemteck.com/CN/Y2021/V1/I1/31

[1]	柴玉川, 高鹏, 崔丽霞. 大缩口回转窑运转功率的计算 [J]. 水泥技术, 2021, 1(1): 24-27.
[2]	冀永涛. 回转窑轮带轴向窜动原因分析及复位调整[J]. 水泥技术, 2020, 1(6): 45-46.
[3]	师美高, 徐金福, 谭迪. 水泥窑耐火材料长周期运行的实践 [J]. 水泥技术, 2020, 1(4): 101-104.
[4]	温彩霞, 张云峰, 范宜斌, 黄顺源. 水泥回转窑筒体表面余热回收供暖系统的设计 [J]. 水泥技术, 2020, 1(1): 68-73.
[5]	贲道春, 仲跻松, 李金峰, 周文华. 托轮轴承座中心高度差配对与测量方法探讨 [J]. 水泥技术, 2019, 1(6): 50-56.
[6]	王学忠, 李宝树, 尚亚宁, 杨小强. 回转窑大齿圈及小齿轮轴密封改造[J]. 水泥技术, 2019, 1(6): 99-100.
[7]	谷德明, 姜志勇, 常亮. 球磨机大小齿轮的安装[J]. 水泥技术, 2019, 1(4): 33-35.
[8]	孙东霞, 王云亭, 王斌章, 张立国. 水泥回转窑大小齿轮传动故障分析和处理 [J]. 水泥技术, 2019, 1(1): 54-57.
[9]	李会如, 陶瑛, 孙学成, 任鞠萍. 危险废弃物焚烧装置优化配置与应用 [J]. 水泥技术, 2018, 1(6): 96-99.
[10]	孙学成, 吴蕾, 陶瑛, 任鞠萍. 回转窑自适应托轮支承装置及啮合传动装置的研究[J]. 水泥技术, 2018, 1(2): 47-49.
[11]	丛晓静, 许龙旭, 刘旭. 提高回转窑大型铸造齿圈质量的研究[J]. 水泥技术, 2018, 1(2): 39-42.
[12]	邓荣娟. 回转窑大齿圈铸造质量及热处理工艺的研究 [J]. 水泥技术, 2018, 1(2): 36-38.
[13]	邓荣娟. 回转窑大齿圈齿面的修复[J]. 水泥技术, 2017, 1(6): 57-60.
[14]	丛晓静. 回转窑大小齿轮磨损原因分析及解决方案[J]. 水泥技术, 2017, 1(1): 60-63.
[15]	白文生. 回转窑大齿圈换面的施工方法 [J]. 水泥技术, 2016, 1(6): 61-63.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[5]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[6]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[7]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[8]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[9]	WANG Qingjiang. Analysis on Mechanical Performance of Typical Joints in Tubular Frame Structure[J]. Cement Technology, 2018, 1(1): 83 -88 .
[10]	LIU Xudong. How to Execute 60 kV Transmission Line EPC Project[J]. Cement Technology, 2018, 1(1): 89 -91 .

Viewed

Full text

Abstract

Cited

Shared

Discussed