Please wait a minute...
水泥技术, 2022, 1(1): 48-52    doi: 10.19698/j.cnki.1001-6171.20221048
  装备技术 本期目录 | 过刊浏览 | 高级检索 |
反击式破碎机排料口间隙与骨料级配的研究
河南黎明重工科技股份有限公司
Research on Discharge Gap and Aggregate Gradation of the Impact Crusher
Henan Liming Heavy Industry Technology Co., Ltd.
下载:  PDF (2656KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 反击式破碎机板锤与反击板之间的排料口间隙是反击式破碎机的重要运行参数,对成品骨料的级配有重要的影响。通过调整反击式破碎机转子的线速度、转速和排料口间隙,研究了不同排料口间隙条件下的成品骨料级配的变化规律,所得结果可用于指导反击式破碎机粗骨料的生产。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
王伟
赵大力
林辉
韩飞
关键词:  反击式破碎机  排料间隙  骨料级配    
Abstract: The discharge gap between the hammer and the impact plate of the impact crusher is an important operating parameter, which has an important impact on the gradation of the finished aggregate. By adjusting the linear speed, rotational speed and discharge gas of the impact crusher, the variation principle of the finished aggregate gradation under the condition of different discharge gas is studied. The results can be used to guide the production of coarse aggregate by the impact crusher.
Key words:  impact crusher    discharge gap    aggregate gradation
收稿日期:  2021-07-31                出版日期:  2022-01-25      发布日期:  2022-01-24      整期出版日期:  2022-01-25
ZTFLH:  TQ172.611.6   
引用本文:    
王伟, 赵大力, 林辉, 韩飞. 反击式破碎机排料口间隙与骨料级配的研究[J]. 水泥技术, 2022, 1(1): 48-52.
WANG Wei, ZHAO Dali, LIN Hui, HAN Fei. Research on Discharge Gap and Aggregate Gradation of the Impact Crusher. Cement Technology, 2022, 1(1): 48-52.
链接本文:  
http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20221048  或          http://www.cemteck.com/CN/Y2022/V1/I1/48
[1] 庄岩, 李许. 阶梯式渐开线型反击板的设计[J]. 水泥技术, 2017, 1(2): 52-55.
[1] . Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2] DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3] LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4] LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5] MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6] HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7] XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8] GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9] WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10] JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview