回转窑托轮调整的方法

doi:10.19698/j.cnki.1001-6171.20222089

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (2160KB)
输出: BibTeX | EndNote (RIS)

摘要

公司2号生产线回转窑长期不能自由上下窜动，导致墩托轮表面磨损严重，加剧了轮带与垫板挡铁之间的磨损，需要对托轮进行调整。调整前，对采集的各组托轮数据进行分析，确定托轮调整方案；调整过程中，记录百分表数值和各组托轮温度变化情况，每次调整量≯0.1mm。调整后，回转窑各组托轮衬瓦温度稳定，轮带、托轮及大小齿轮啮合运行情况正常，回转窑能够自由上下窜动。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	莫计松
	潘国文
	刘骥
	黄兴望

关键词: 回转窑托轮衬瓦温度轮带

Abstract:

The rotary kiln of our company's No.2 production line had not been able to bounce up and down freely for a long time, resulting in serious wear on the surface of the pier supporting wheel, aggravating the wear between the wheel belt and the backing plate retaining iron, so the supporting wheel needs to be adjusted. Before adjustment, the collected data of each group of supporting rollers was analyzed to determine the adjustment scheme of supporting rollers; during the adjustment, the value of the dial indicator and the temperature change of each group of supporting rollers was recorded, and the amount of each adjustment was ≯0.1mm. After adjustment, the temperature of each supporting wheel of the rotary kiln is stable, the meshing operation of the wheel belt, supporting wheel and large and small gears is normal, and the rotary kiln can bounce up and down freely.

Key words: rotary kiln roller bearing temperature tire

收稿日期: 2021-06-26 出版日期: 2022-03-25 发布日期: 2022-03-25 整期出版日期: 2022-03-25

ZTFLH:

TQ172.622.29

引用本文:

莫计松, 潘国文, 刘骥, 黄兴望. 回转窑托轮调整的方法[J]. 水泥技术, 2022, 1(2): 89-92.
MO Jisong, PAN Guowen, LIU Ji, HUANG Xingwang. Adjustment Method of Supporting Roller of Rotary Kiln. Cement Technology, 2022, 1(2): 89-92.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20222089 或 http://www.cemteck.com/CN/Y2022/V1/I2/89

[1]	徐文斌, 都施金, 沈银鹏, 刘西诚. 回转窑托轮的在线修复[J]. 水泥技术, 2022, 1(1): 57-61.
[2]	曹辉辉. 电石渣配料生产线回转窑结圈分析与处理[J]. 水泥技术, 2022, 1(1): 79-82.
[3]	王巧林. 水泥回转窑孤网运行经验探讨[J]. 水泥技术, 2021, 1(4): 94-96.
[4]	李纲, 万天静, 谭迪, 赵宇, 姬炯. 水泥回转窑筒体椭圆度对耐火衬体的影响及应对措施[J]. 水泥技术, 2021, 1(3): 49-54.
[5]	柴玉川, 高鹏, 崔丽霞. 大缩口回转窑运转功率的计算 [J]. 水泥技术, 2021, 1(1): 24-27.
[6]	赵鑫磊. 回转窑的调测方法[J]. 水泥技术, 2021, 1(1): 31-33.
[7]	冀永涛. 回转窑轮带轴向窜动原因分析及复位调整[J]. 水泥技术, 2020, 1(6): 45-46.
[8]	师美高, 徐金福, 谭迪. 水泥窑耐火材料长周期运行的实践 [J]. 水泥技术, 2020, 1(4): 101-104.
[9]	赵丽美, 尚贺军, 李玲. 大型高性能30Mn5钢锻造轮带的制作 [J]. 水泥技术, 2020, 1(3): 39-42.
[10]	温彩霞, 张云峰, 范宜斌, 黄顺源. 水泥回转窑筒体表面余热回收供暖系统的设计 [J]. 水泥技术, 2020, 1(1): 68-73.
[11]	贲道春, 仲跻松, 李金峰, 周文华. 托轮轴承座中心高度差配对与测量方法探讨 [J]. 水泥技术, 2019, 1(6): 50-56.
[12]	孙东霞, 王云亭, 王斌章, 张立国. 水泥回转窑大小齿轮传动故障分析和处理 [J]. 水泥技术, 2019, 1(1): 54-57.
[13]	李会如, 陶瑛, 孙学成, 任鞠萍. 危险废弃物焚烧装置优化配置与应用 [J]. 水泥技术, 2018, 1(6): 96-99.
[14]	孙学成, 吴蕾, 陶瑛, 任鞠萍. 回转窑自适应托轮支承装置及啮合传动装置的研究[J]. 水泥技术, 2018, 1(2): 47-49.
[15]	丛晓静, 许龙旭, 刘旭. 提高回转窑大型铸造齿圈质量的研究[J]. 水泥技术, 2018, 1(2): 39-42.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed