矿山输送廊道钢结构修复施工的新方法

doi:10.19698/j.cnki.1001-6171.20224054

下载:

PDF (5145KB)
输出: BibTeX | EndNote (RIS)

摘要介绍了矿山输送廊道钢结构工程修复方案、修复重点和施工过程。边坡失稳导致矿山破碎与输送系统胶带输送机基础钢结构支架损坏、桁架移位，在无法使用大型吊装设备的环境下，采用吊桥运送方式将待更换桁架及其他构配件悬吊至设计位置进行了修复处理，并验算了龙门架主吊索荷载和安全系数。该方法对环境破坏性小，操作简单，适应性强。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	夏春生
	路海军
	朱向国

关键词: 输送廊道钢结构修复悬吊施工方法

Abstract: This paper introduces the restoration plan, key points and construction process of steel structure engineering of mine conveying corridor. The instability of the slope leads to the crushing of the mine and the damage to the basic steel structure of the belt conveyor of the conveying system and the displacement of the truss. In the environment where large-scale hoisting equipment cannot be used, the truss and other components to be replaced are suspended to the design position by means of suspension bridge transportation. Repair processing was carried out, and the main sling load and safety factor of the gantry frame were checked. The method is less destructive to the environment, simple in operation and strong in adaptability.

Key words: conveying corridor steel structure repair suspension construction method

收稿日期: 2021-11-12 修回日期: 2022-07-25 出版日期: 2022-07-25 发布日期: 2022-07-25 整期出版日期: 2022-07-25

ZTFLH:

TQ172.687

引用本文:

夏春生, 路海军, 朱向国. 矿山输送廊道钢结构修复施工的新方法[J]. 水泥技术, 2022, 1(4): 54-59.
XIA Chunsheng, LU Haijun, ZHU Xiangguo. A New Method for Repairing Construction of Steel Structure of Mine Conveying Corridor. Cement Technology, 2022, 1(4): 54-59.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20224054 或 http://www.cemteck.com/CN/Y2022/V1/I4/54

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .