辊磨磨辊轴承的选型设计

doi:10.19698/j.cnki.1001-6171.20186040

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (4974KB)
输出: BibTeX | EndNote (RIS)

摘要磨辊轴承是辊磨中的关键部件，其性能直接影响辊磨的安全性和可靠性。对某型号磨辊中的轴承进行了选型分析和寿命计算，研究了轴承密封、轴承润滑、轴承游隙等影响轴承设计的重要因素。实践证明，正确选用、正确使用和维护磨辊轴承，能够提高轴承的实际使用寿命，有效避免损失。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	韩有昂

关键词: 辊磨磨辊轴承选型

Abstract: The bearings for the roller used were the key parts in vertical roller mill, whose performance directly affects the safety and reliability of the vertical roller mill. Type selection and the rated life of the bearings in a certain type of the vertical roller mill were analyzed and calculated. Other important factors in design of the bearings were studied, such as bearing seals, bearing lubrication, bearing clearance and so on. The practice has proved that the correct type selection, the proper use and maintenance of the bearings can increase the actual service life, effectively avoid losses.

Key words: vertical roller mill roller bearing type selection

收稿日期: 2018-04-27 出版日期: 2018-11-25 发布日期: 2018-11-28 整期出版日期: 2018-11-25

ZTFLH:

TQ172.632.5

引用本文:

韩有昂. 辊磨磨辊轴承的选型设计[J]. 水泥技术, 2018, 1(6): 40-43.
HAN You'ang. Type Selection and Design of the Bearings for the Roller Used in Vertical Roller Mill. Cement Technology, 2018, 1(6): 40-43.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20186040 或 http://www.cemteck.com/CN/Y2018/V1/I6/40

[1]	宋留庆, 聂文海, 柴星腾, 杜鑫. TRM型立式辊磨粉磨冶金渣的现状 [J]. 水泥技术, 2019, 1(1): 60-64.
[2]	屈利良, 张世英, 孙鹏, 胡金璐. MLS4531A辊磨磨辊现场装配工艺 [J]. 水泥技术, 2018, 1(6): 46-49.
[3]	杜鑫, 宋留庆, 贺孝一, 豆海建, 秦中华, 张明飞, 王维莉. 不同混合材对水泥辊磨产品比表面积的影响 [J]. 水泥技术, 2018, 1(5): 68-72.
[4]	陈军, 聂文海, 于涛, 竹永奎, 王振中. 原料辊磨系统能耗分析及节能改造实例 [J]. 水泥技术, 2018, 1(5): 101-103.
[5]	柴星腾, 聂文海, 秦中华, 杜鑫. 水泥辊磨技术的新进展[J]. 水泥技术, 2018, 1(4): 21-25.
[6]	魏娜, 王迪. TRM型生料辊磨的操作和维护 [J]. 水泥技术, 2018, 1(3): 70-72.
[7]	侯跃光. 余热电站机组振动异常的几种原因分析[J]. 水泥技术, 2018, 1(3): 80-83.
[8]	徐元元. TRMS45.2矿渣辊磨的工作原理及调试 [J]. 水泥技术, 2018, 1(2): 43-46.
[9]	豆海建, 王维莉, 秦中华, 杜鑫, 柴星腾, 于涛. 辊磨压力框架磨损问题的流场分析研究[J]. 水泥技术, 2018, 1(2): 26-30.
[10]	刘冀强, 贡利坤, 于辰平, 侯晓昆. ZGM113G中速辊磨入风口的改造 [J]. 水泥技术, 2018, 1(2): 98-99.
[11]	靳爽. 袋式收尘器在矿渣粉磨系统中的应用[J]. 水泥技术, 2018, 1(1): 72-73.
[12]	郑倩. 浅析TRM型辊磨磨辊轴承的润滑[J]. 水泥技术, 2017, 1(5): 41-43.
[13]	蔡晓亮, 赵剑波, 宋留庆, 王倩, 崔军利. TRMS56.3矿渣辊磨的特点及现场使用[J]. 水泥技术, 2017, 1(5): 49-52.
[14]	丁再珍, 张峰亮. 辊磨磨辊辊套和磨盘衬板材质的发展和选择[J]. 水泥技术, 2017, 1(5): 53-55.
[15]	马会来, 赵剑波, 陈智峰, 李静, 秦景平. 在线监测系统在大型辊磨中的应用[J]. 水泥技术, 2017, 1(4): 26-30.

[1]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[2]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[3]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[4]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[5]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[6]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[7]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[8]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[9]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .
[10]	WANG Qingjiang. Analysis on Mechanical Performance of Typical Joints in Tubular Frame Structure[J]. Cement Technology, 2018, 1(1): 83 -88 .

Viewed

Full text

Abstract

Cited

Shared

Discussed