辊压机柱钉辊辊面的研究与分析

doi:10.19698/j.cnki.1001-6171.20192032

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (6219KB)
输出: BibTeX | EndNote (RIS)

摘要对辊压机中的柱钉辊辊面形式进行了简要介绍。柱钉辊辊面的使用，提高了辊压机的运转周期和使用寿命，减少了辊面的维护频率，降低了综合成本。但随着柱钉辊的应用越来越广泛，也产生了一些新的问题。文中重点介绍和分析了柱钉辊辊面的失效形式，主要包括柱钉断裂、蹦角和掉落及辊面裂纹和掉块，并利用仿真软件对这些现象进行分析，提出相应的解决方法。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	黄贺

关键词: 辊压机柱钉辊辊面断裂掉落裂纹仿真

Abstract: The paper briefly introduced a type of roller presses whose roller surface installed with column nails. The operating cycle and lifetime had been improved by this type of roller press. The maintenance frequency of roller surface and entire cost were also reduced. However, with the more application of this type of roller press, some new problems had arisen. The paper focused on introducing and analyzing the failure modes of the roller surface, including the breakage and drop of nails and crack and drop of roller surface. The solutions were proposed for these issues by simulation results.

Key words: roller press roller surface with column nails breakage drop crack simulation

收稿日期: 2018-10-09 出版日期: 2019-03-25 发布日期: 2019-04-26 整期出版日期: 2019-03-25

ZTFLH:

TQ172.639

引用本文:

黄贺.

辊压机柱钉辊辊面的研究与分析

[J]. 水泥技术, 2019, 1(2): 32-36.
HUANG He. Research and Analysis of the Roller Surface with Column Nails of Roller Press. Cement Technology, 2019, 1(2): 32-36.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20192032 或 http://www.cemteck.com/CN/Y2019/V1/I2/32

[1]	王振生, 石国平, 王明治, 王娜, 柴星腾. 辊压机在水泥生产中应用的最新进展 [J]. 水泥技术, 2018, 1(6): 61-64.
[2]	常亮. 辊压机液压系统操作压力的合理选用 [J]. 水泥技术, 2018, 1(4): 42-44.
[3]	何毛, 王小峰, 石国平. 轻质物料较粗成品的辊压及干式分选试验探索[J]. 水泥技术, 2018, 1(3): 30-33.
[4]	肖静, 曹凯, 贺孝一. 磨内结构对水泥流动度的影响 [J]. 水泥技术, 2018, 1(3): 77-79.
[5]	朱守刚. 辊压机循环物料钢丝胶带提升机的应用[J]. 水泥技术, 2017, 1(6): 61-63.
[6]	侯龙华, 柴星腾, 贺孝一. 水泥辊压机预粉磨系统电耗评价探讨[J]. 水泥技术, 2017, 1(5): 19-24.
[7]	王振生. 生料中卸球磨粉磨系统改为辊压机终粉磨系统的方案对比[J]. 水泥技术, 2017, 1(5): 39-40.
[8]	张峰亮. 5 000t/d熟料生产线生料粉磨系统改造[J]. 水泥技术, 2017, 1(4): 89-92.
[9]	赵晓东 . 采用辊压机终粉磨工艺制备矿渣微粉作水泥混合材[J]. 水泥技术, 2017, 1(4): 64-66.
[10]	侯国锋, 张黎, 褚旭, 王复然, 石国平, 许芬. 辊压机终粉磨系统生产钢铁渣粉工艺设计及优化[J]. 水泥技术, 2017, 1(2): 45-48.
[11]	张秀全, 张中国. 辊磨减速机输出法兰螺栓和销子断裂分析及解决措施[J]. 水泥技术, 2016, 1(1): 81-84.
[12]	刘翔. 在役回转窑托轮表面波检测裂纹深度的判定 [J]. 水泥技术, 2015, 1(5): 38-39.
[13]	侯国锋. 辊压机终粉磨生产矿渣微粉的实践[J]. 水泥技术, 2015, 1(5): 48-49.
[14]	于浚哲, 滕延伟, 褚旭. 基于ANSYS Workbench的辊压机辊子过盈联接应力分析 [J]. 水泥技术, 2015, 1(3): 38-40.
[15]	赵翔, 郭小平, 朴志友, 石鹏雄. BP神经网络在爆破块度预测中的应用研究 [J]. 水泥技术, 2015, 1(1): 36-39.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[4]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[5]	CAI Wu. [J]. Cement Technology, 2018, 1(1): 96 -98 .
[6]	BAN Jianhong. Technical Experience of MLS3726 Raw Meal Roller Grinding System Modification to Improve Capacity and Reduce Consumption#br#[J]. Cement Technology, 2018, 1(1): 98 -102 .
[7]	YAO Piqiang, HAN Hui, YU Weimin. Study on Calcining and Preliminary Application of New Low Calcium Cement[J]. Cement Technology, 2018, 1(2): 17 -25 .
[8]	DOU Haijian, WANG Weili, QIN Zhonghua, DU Xin, CHAI Xingteng, YU Tao. The Flow Analysis Research of the Pressure Frame Wear Problem in a Roller Mill[J]. Cement Technology, 2018, 1(2): 26 -30 .
[9]	JI Lei, ZHAO Xuhong, CAO Pei, ZHAO Yu, SUN He, HUANG Yongsheng, WEI Juan, ZHANG Guangfang, YU Gang, WU De Hou, . Study of Typical Pollutants' Solidification in Clinker in the Co-processing Hazardous Waste in Cement Kiln[J]. Cement Technology, 2018, 1(2): 31 -35 .
[10]	DENG Rongjuan. Study on Casting Quality and Heat Treatment for Rotary Kiln Girth Gear[J]. Cement Technology, 2018, 1(2): 36 -38 .

Viewed

Full text

Abstract

Cited

Shared

Discussed