水泥磨粗磨仓衬板的改进

doi:10.19698/j.cnki.1001-6171.20192036

Please wait a minute...

下载:

PDF (2467KB)
输出: BibTeX | EndNote (RIS)

摘要通过优化水泥磨粗磨仓衬板的结构形式，合理选择衬板材质，优化研磨体级配，明显降低了水泥磨钢铁损耗，显著提高了衬板的使用寿命。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	张辉
	宋家明

关键词: 水泥磨环沟阶梯衬板衬板材质研磨体级配

收稿日期: 2018-10-12 出版日期: 2019-03-25 发布日期: 2019-04-26 整期出版日期: 2019-03-25

ZTFLH:

TQ172.632.1

引用本文:

张辉, 宋家明. 水泥磨粗磨仓衬板的改进[J]. 水泥技术, 2019, 1(2): 36-39.
ZHANG Hui, SONG Jiaming. Improvement of Cement Mill Coarse Grinding Chamber Lining Plate. Cement Technology, 2019, 1(2): 36-39.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20192036 或 http://www.cemteck.com/CN/Y2019/V1/I2/36

[1]	魏灿, 俞利涛, 童睿, 王纯良. 水泥粉磨智能优化控制系统的应用 [J]. 水泥技术, 2019, 1(3): 33-39.
[2]	尚义华. ϕ4.2m×13m水泥磨的技术改造 [J]. 水泥技术, 2019, 1(1): 87-91.
[3]	肖静, 曹凯, 贺孝一. 磨内结构对水泥流动度的影响 [J]. 水泥技术, 2018, 1(3): 77-79.
[4]	张伟, 李成群. ϕ3m×12.5m水泥磨齿轮磨损分析[J]. 水泥技术, 2015, 1(2): 52-53.
[5]	张莉. 提高氧化铝熟料粉磨效率途径的探讨[J]. 水泥技术, 2015, 1(1): 43-45.
[6]	边汉民, 赵义兵, 马秀宽. 烘干中卸生料磨改造为水泥磨[J]. 水泥技术, 2012, 1(5): 25-27.
[7]	李桂超, 赵义兵, 马秀宽, 魏艳. 水泥磨增加辊压机的提产改造 [J]. 水泥技术, 2012, 1(4): 29-31.
[8]	夏猛, 张家凡, 李茂华, 黄之初. 大型水泥磨减速箱故障诊断 [J]. 水泥技术, 2007, 1(3): 40-42.
[9]	史韶光, 倪世林, 李雄波. ϕ4.2m×10m水泥磨端盖的更换 [J]. 水泥技术, 2007, 1(1): 35-36.
[10]	苏宜清, 黄民, 李志明. 水泥磨传动系统的故障诊断与分析 [J]. 水泥技术, 2005, 1(4): 31-33.

[1]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[2]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[3]	WANG Qingjiang. Analysis on Mechanical Performance of Typical Joints in Tubular Frame Structure[J]. Cement Technology, 2018, 1(1): 83 -88 .
[4]	MENG Lingju. [J]. Cement Technology, 2018, 1(1): 103 -104 .
[5]	YAO Piqiang, HAN Hui, YU Weimin. Study on Calcining and Preliminary Application of New Low Calcium Cement[J]. Cement Technology, 2018, 1(2): 17 -25 .
[6]	DENG Rongjuan. Study on Casting Quality and Heat Treatment for Rotary Kiln Girth Gear[J]. Cement Technology, 2018, 1(2): 36 -38 .
[7]	XU Yuanyuan. Working Principle and Comissioning of TRMS 45.2 Slag Roller Mill[J]. Cement Technology, 2018, 1(2): 43 -46 .
[8]	LIN Renzhang, SHI Jiageng. Introduction of the Integrated Long Belt Conveyor in Sinoma DANGOTE Project[J]. Cement Technology, 2018, 1(2): 50 -55 .
[9]	ZHANG Yu. Application of Surge Protective Device in Low Voltage Distribution System of Cement Engineering [J]. Cement Technology, 2018, 1(2): 56 -58 .
[10]	LI Wenxue. Analysis and Countermeasures for the Dropout of Cement Plant Self-contained Power Station[J]. Cement Technology, 2018, 1(2): 65 -66 .

Viewed

Full text

Abstract

Cited

Shared

Discussed