浅谈辊磨选粉机下部轴承的改造方案

doi:10.19698/j.cnki.1001-6171.20195102

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (3341KB)
输出: BibTeX | EndNote (RIS)

摘要分析了辊磨选粉机下部轴承存在的问题，针对问题进行了改造，将下部轴承拉杆头部连接处改为锥形销子固定，加强管路维护，在原轴承座上加装水冷装置。改造后，拉杆易断裂、轴承温度高的问题得到了彻底解决。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	方鹏

关键词: 辊磨轴承拉杆冷却

Abstract: It analyzes the problems existing in the lower bearings of the roller grinding machine, and reconstructs the problems. The head connection of the lower bearings is changed to a conical pin fixed, the maintenance of the pipeline is strengthened, and a water-cooled device is installed on the original bearing base. After the transformation, the problem of the rod breaking and the high temperature of the bearing has been completely solved.

Key words: roll mill bearing pull rod cooling

收稿日期: 2019-05-05 出版日期: 2019-09-25 发布日期: 2019-09-24 整期出版日期: 2019-09-25

ZTFLH:

TQ172.632.5

引用本文:

方鹏.

浅谈辊磨选粉机下部轴承的改造方案

[J]. 水泥技术, 2019, 1(5): 102-104.
FANG Peng. On the Reform Scheme of Lower Bearing of Roller Grinding Powder Machine. Cement Technology, 2019, 1(5): 102-104.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20195102 或 http://www.cemteck.com/CN/Y2019/V1/I5/102

[1]	贲道春, 仲跻松, 李金峰, 周文华. 托轮轴承座中心高度差配对与测量方法探讨 [J]. 水泥技术, 2019, 1(6): 50-56.
[2]	黄新云. 减速机高速轴轴承故障的处置 [J]. 水泥技术, 2019, 1(6): 101-102.
[3]	刘迪, 聂文海, 柴星腾, 王奇. 国产TRMK5341水泥辊磨的开发及应用 [J]. 水泥技术, 2019, 1(5): 19-22.
[4]	曹军波, 饶锐, 任森. 辊磨智能控制系统在水泥原料辊磨上的应用 [J]. 水泥技术, 2019, 1(5): 52-55.
[5]	陈军, 丁再珍, 赵剑波, 于涛, 豆海建, 杜鑫, 徐兵波, 宋留庆, 刘迪, 邵青. 生料外循环辊磨技术及应用实例 [J]. 水泥技术, 2019, 1(4): 36-39.
[6]	方鹏. 浅谈大型辊磨减速机维护方案 [J]. 水泥技术, 2019, 1(4): 45-48.
[7]	王建峰. 余热电站汽轮发电机组轴振大的处理 [J]. 水泥技术, 2019, 1(4): 61-65.
[8]	尚丽平, 宋亮亮. TSLM司德伯生料辊磨密封喂料器 [J]. 水泥技术, 2019, 1(4): 102-104.
[9]	蔡晓亮, 刘传胜, 丁再珍, 赵剑波, 陈心自, 高云详, 王倩. TRMS60.3矿渣辊磨的技术特点及应用 [J]. 水泥技术, 2019, 1(3): 40-44.
[10]	刘迪, 豆海建, 聂文海, 柴星腾, 王奇, 宋留庆, 吕可馨. N-U型选粉机用于生料辊磨改造的实例分析 [J]. 水泥技术, 2019, 1(3): 45-47.
[11]	陈远彬. 冷却风机轴承振动案例分析 [J]. 水泥技术, 2019, 1(2): 40-43.
[12]	宋留庆, 聂文海, 柴星腾, 杜鑫. TRM型立式辊磨粉磨冶金渣的现状 [J]. 水泥技术, 2019, 1(1): 60-64.
[13]	韩有昂. 辊磨磨辊轴承的选型设计[J]. 水泥技术, 2018, 1(6): 40-43.
[14]	屈利良, 张世英, 孙鹏, 胡金璐. MLS4531A辊磨磨辊现场装配工艺 [J]. 水泥技术, 2018, 1(6): 46-49.
[15]	李会如, 陶瑛, 孙学成, 任鞠萍. 危险废弃物焚烧装置优化配置与应用 [J]. 水泥技术, 2018, 1(6): 96-99.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed