三维图像识别成形技术在辊压机辊面监测上的应用

doi:10.19698/j.cnki.1001-6171.20205071

下载:

PDF (3466KB)
输出: BibTeX | EndNote (RIS)

摘要简要介绍了三维图像识别成形技术，在此技术基础上开发了一套辊压机辊面的三维图像扫描设备，基于该设备形成了一套辊压机辊面三维图像扫描系统。通过该系统，对获取的辊压机辊面的三维图像以及相关数据进行分析研究，可得到辊面的运行状况、磨损程度等信息，实现对辊压机辊面的在线监测，避免辊面过度磨损，减少维护人员的工作量，提高粉磨设备的智能化水平。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	黄贺

关键词: 三维图像成形辊压机辊面在线监测智能化

Abstract: This paper briefly introduced the recognition and forming technology of 3D image. Based on this technology, a set of scanning and generating equipment for 3D image of the roller surface had been developed. Based on this equipment, a set of 3D image scanning system of roller press is formed. The information such as the operating condition and wear of the roller surface could be obtained by analyzing the 3D image of the roller surface of the roller press acquired from the system. By this method, the online monitoring of the roller surface could be realized to avoid excessive wear of roller surface. Then the workload of maintenance could be reduced and the intelligence level of grinding equipment could also be improved.

Key words: 3D image forming roller surface of roller press online monitoring intelligent

收稿日期: 2020-03-05 出版日期: 2020-09-25 发布日期: 2020-10-12 整期出版日期: 2020-09-25

ZTFLH:

TQ172.639

引用本文:

黄贺.

三维图像识别成形技术在辊压机辊面监测上的应用

[J]. 水泥技术, 2020, 1(5): 71-73.
HUANG He. Application of 3D Image Forming Technology in Monitoring of Roll Surface for Roller Press. Cement Technology, 2020, 1(5): 71-73.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20205071 或 http://www.cemteck.com/CN/Y2020/V1/I5/71

[1]	徐文斌, 袁明伟, 吴福, 王仕进, 章星. 智能质量控制系统在水泥生产线上的应用 [J]. 水泥技术, 2020, 1(6): 53-57.
[2]	郁国强, 张宝刚, 董克忠, 赵小雷. 新型干法水泥生产线设备精细化管理的应用[J]. 水泥技术, 2020, 1(6): 33-40.
[3]	王爱琴, 于浩波, 罗振, 李志军. 石灰石-石膏湿法烟气脱硫智能化控制系统 [J]. 水泥技术, 2020, 1(6): 30-32.
[4]	蔡晓亮, 刘传胜, 丁再珍, 赵剑波, 陈心自, 高云详, 王倩. TRMS60.3矿渣辊磨的技术特点及应用 [J]. 水泥技术, 2019, 1(3): 40-44.
[5]	马会来, 赵剑波, 陈智峰, 李静, 秦景平. 在线监测系统在大型辊磨中的应用[J]. 水泥技术, 2017, 1(4): 26-30.
[6]	丛培泽, 陈黎明. 电气设备的温度在线监测[J]. 水泥技术, 2008, 1(5): 92-94.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[5]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[6]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[7]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[8]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .