预热器结构大跨度梁底支撑模板装备的开发

doi:10.19698/j.cnki.1001-6171.20213031

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (4382KB)
输出: BibTeX | EndNote (RIS)

摘要对混凝土预热器结构高大跨度梁底支撑模板装备进行了二次开发，将高大跨度梁底支撑系统分成模板桁架支撑装置、端部支撑及安装高度调整装置以及自拆除装置等三个部分。该系统具备整装整拆和自拆除的功能，有效简化了施工作业及施工流程，提升了施工效率，改善了作业环境，有利于先进施工工艺用于高大跨度梁结构的施工。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	孙小永

关键词: 预热器梁底支撑模板高跨度梁结构自拆卸

Abstract: The secondary development of the high-span beam bottom support formwork equipment for the concrete preheater structure is carried out. The high-span beam bottom support system is divided into three parts: formwork truss support device, end support and installation height adjustment device, and self-disassembly device. The system has the functions of complete assembly and disassembly and self-demolition, which effectively simplifies the construction operation and construction process, improves the construction efficiency, improves the working environment, and is conducive to the use of advanced construction techniques for the construction of high and large span beam structures.

Key words: preheater beam bottom support formwork high-span beam structure self-demolition

收稿日期: 2020-11-12 出版日期: 2021-05-25 发布日期: 2021-05-26 整期出版日期: 2021-05-25

ZTFLH:

TU755.21

引用本文:

孙小永. 预热器结构大跨度梁底支撑模板装备的开发[J]. 水泥技术, 2021, 1(3): 31-34.
SUN Xiaoyong. Development of Formwork Equipment for Long-span Beam Bottom Support of Preheater Structure#br#. Cement Technology, 2021, 1(3): 31-34.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20213031 或 http://www.cemteck.com/CN/Y2021/V1/I3/31

[1]	张小龙, 赵思鑫, 闫永强. 2 500t/d水泥生产线的节能改造 [J]. 水泥技术, 2021, 1(2): 93-96.
[2]	陈廷伟, 彭学平, 臧建波, 刘万平, 董蕊. 2 500t/d水泥熟料生产线预热器系统技术改造[J]. 水泥技术, 2020, 1(3): 17-20.
[3]	马娇媚, 彭学平, 狄东仁, 赵亮, 陈昌华, 李波, 王伟. 水泥低能耗先进烧成技术研究与应用[J]. 水泥技术, 2019, 1(3): 21-28.
[4]	马娇媚, 刘芳, 郭天代, 陶从喜, 彭学平. 5 500t/d六级预热器烧成系统的开发应用[J]. 水泥技术, 2017, 1(4): 22-25.
[5]	欧阳昆翔, 袁亦斌, 欧丹林, 梁逸敏. 生料分料CAM智能控制系统的研发与应用 [J]. 水泥技术, 2016, 1(5): 28-31.
[6]	陶从喜, 董蕊, 钟克辉, 黄茂, 陈廷伟, 刘长锁, 苏兴辉, 梁乾, 陈学勇, 马玉国, 李国军. 2500 t/d烧成系统的改造[J]. 水泥技术, 2014, 1(6): 17-19.
[7]	包文忠, 刘忠成, 张福滨. 增设C2蒸汽过热器提高余热发电能力的分析 [J]. 水泥技术, 2014, 1(3): 100-102.
[8]	盛洁, 公磊 , 李昌勇. 余热发电项目中预热器级数的选择[J]. 水泥技术, 2011, 1(1): 98-100.
[9]	陶从喜, 孙洁. 浅析6级预热器的推广与应用[J]. 水泥技术, 2009, 1(6): 31-34.
[10]	彭学平, 陶从喜, 王洪霞. 旋风预热器结构性能的研究 [J]. 水泥技术, 2008, 1(5): 23-26.
[11]	陶从喜. 预热器系统的阻力及降阻[J]. 水泥技术, 2008, 1(1): 20-23.
[12]	张冠卿, 李昌勇. 5500t／d顶级旋风预热器的综合研究与评述 [J]. 水泥技术, 2006, 1(3): 33-36.
[13]	何国丰. 固力水泥厂600t／dSP窑生产线设计与生产 [J]. 水泥技术, 2004, 1(3): 51-53.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed