ϕ4.2m×13.5m水泥磨系统的节能改造

doi:10.19698/j.cnki.1001-6171.20216037

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (3523KB)
输出: BibTeX | EndNote (RIS)

摘要为了提高?4.2m×13.5m球磨机水泥联合粉磨系统产量，降低系统电耗，通过改造水泥磨选粉机、增加收尘系统过滤面积，增设辊压机系统三分离选粉机，调整系统工艺流程等技术措施，实现了提产降耗的目标，水泥磨系统平均产量提升了18.83t/h，工序电耗降低了4.47kW·h/t。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	吴亮
	韩博文
	刘小龙

关键词: 水泥粉磨选粉机收尘器节能改造

Abstract: In order to improve the output of the cement combined grinding system of the ?4.2m×13.5m ball mill and reduce the power consumption of the system, technical measures were carried out including transforming the cement mill separator, increasing the filtering area of the dust collection system, adding the three-classified separation of the roller press system, adjusting the system process flow and so on. The goals were achieved. The average output of the cement grinding system was increased by 18.83t/h, and the process power consumption was reduced by 4.47kW·h/t.

Key words: cement grinding powder separator dust collector energy saving transformation

收稿日期: 2021-08-11 出版日期: 2021-11-25 发布日期: 2021-11-22 整期出版日期: 2021-11-25

ZTFLH:

TQ172.632.1

引用本文:

吴亮, 韩博文, 刘小龙. ϕ4.2m×13.5m水泥磨系统的节能改造[J]. 水泥技术, 2021, 1(6): 37-42.
WU Liang, HAN Bowen, LIU Xiaolong. Energy Saving Transformation of ϕ 4.2m ×13.5m Cement Mill System. Cement Technology, 2021, 1(6): 37-42.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20216037 或 http://www.cemteck.com/CN/Y2021/V1/I6/37

[1]	张松立, 马娇媚. 弱涡流低阻预热器节能技术及应用[J]. 水泥技术, 2021, 1(5): 36-39.
[2]	李鹏飞, 孙书强, 杨利锋, 王跃峰, 刘保平. 煤磨袋收尘器不通风故障的分析处理[J]. 水泥技术, 2021, 1(5): 79-81.
[3]	任项存, 王占甫. TRM53.4原料辊磨系统的优化升级 [J]. 水泥技术, 2021, 1(2): 89-92.
[4]	周文良. HRM3400生料辊磨选粉机转子密封的改进 [J]. 水泥技术, 2020, 1(5): 50-52.
[5]	吕忠明. 气箱收尘器脉冲喷射噪声分析与治理 [J]. 水泥技术, 2020, 1(3): 74-76.
[6]	李光业, 孔金山. 立式辊磨在石膏粉磨上的应用 [J]. 水泥技术, 2020, 1(2): 31-35.
[7]	石国平, 罗占仁, 王明治, 李洪, 柴星腾. 生料辊压机终粉磨系统技术研究及应用[J]. 水泥技术, 2020, 1(1): 17-22.
[8]	岳庆辉, 潘广庆, 苗庆峰. 水泥粉磨系统节能优化技术改造 [J]. 水泥技术, 2020, 1(1): 40-43.
[9]	王烨. 基于Pro/E的动态选粉机模块化设计 [J]. 水泥技术, 2019, 1(6): 38-41.
[10]	古金华. 水泥熟料生产线窑头电收尘器的改造 [J]. 水泥技术, 2019, 1(6): 95-98.
[11]	刘迪, 聂文海, 柴星腾, 王奇. 国产TRMK5341水泥辊磨的开发及应用 [J]. 水泥技术, 2019, 1(5): 19-22.
[12]	蔡晓亮, 刘传胜, 丁再珍, 赵剑波, 陈心自, 高云详, 王倩. TRMS60.3矿渣辊磨的技术特点及应用 [J]. 水泥技术, 2019, 1(3): 40-44.
[13]	刘迪, 豆海建, 聂文海, 柴星腾, 王奇, 宋留庆, 吕可馨. N-U型选粉机用于生料辊磨改造的实例分析 [J]. 水泥技术, 2019, 1(3): 45-47.
[14]	王烨, 于爱玲, 张爽. 辊压机粉磨系统中组合式选粉机的重量估算方法[J]. 水泥技术, 2019, 1(1): 38-40.
[15]	豆海建, 秦中华, 王维莉, 柴星腾, 于涛, 赵剑波. 一种U型动叶片选粉机的研究及应用[J]. 水泥技术, 2018, 1(6): 34-39.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed