TRM辊磨粉磨抗硫酸盐水泥的应用

doi:10.19698/j.cnki.1001-6171.20224034

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (2297KB)
输出: BibTeX | EndNote (RIS)

摘要

分析了抗硫酸盐水泥的特点、熟料矿物组成及抗硫酸盐水泥的易磨性，介绍了TRMK3621辊磨终粉磨系统在粉磨抗硫酸盐水泥中的应用。TRMK3621型辊磨将传统的平盘结构改为略带角度的斜盘，增加了研磨区宽度，物料适应性较强。抗硫酸盐水泥较普通硅酸盐水泥难磨，采用TRMK3621辊磨粉磨抗硫酸盐水泥熟料，系统运行稳定、操作简便，产量达95t/h以上，比表面积330m²/kg，电耗32kW·h/t。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	彭凌云
	赵海洋
	刘金磊

关键词: 辊磨终粉磨抗硫酸盐水泥

Abstract:

The characteristics of sulfate-resistant cement, the composition of clinker minerals and the grindability of sulfate-resistant cement were analyzed. The application of TRMK3621 roller mill final grinding system in grinding sulfate-resistant cement was introduced. TRMK3621 type roller mill changes the traditional flat disc structure into a slightly angled swash plate, increases the width of the grinding area, and has strong material adaptability. Sulfate-resistant cement is more difficult to grind than ordinary Portland cement. TRMK3621 roller mill is used to grind sulfate-resistant cement clinker. The system runs stably and is easy to operate. The output is over 95t/h, the specific surface area is 330m2/kg, and the power consumption is 32kW·h/t.

Key words: roller mill final grinding sulfate-resistant cement

收稿日期: 2022-04-12 修回日期: 2022-07-25 出版日期: 2022-07-25 发布日期: 2022-07-25 整期出版日期: 2022-07-25

ZTFLH:

TQ172.632.5

基金资助: 中国建材集团攻关专项（2021HX0405）

引用本文:

彭凌云, 赵海洋, 刘金磊. TRM辊磨粉磨抗硫酸盐水泥的应用[J]. 水泥技术, 2022, 1(4): 34-38,46.
PENG Lingyun, ZHAO Haiyang, LIU Jinlei. Application of TRM Roller Mill for Grinding Sulfate Resistant Cement. Cement Technology, 2022, 1(4): 34-38,46.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20224034 或 http://www.cemteck.com/CN/Y2022/V1/I4/34

[1]	宋宇范. 辊磨减速机静压轴承瓦面损伤原因及处理措施[J]. 水泥技术, 2022, 1(5): 41-46.
[2]	李晓剑. 水泥辊压机半终粉磨系统的提产改造[J]. 水泥技术, 2022, 1(3): 17-21.
[3]	李铭哲, 杜鑫, 聂文海, 石国平, 秦中华. 国内外水泥料床终粉磨系统的工业应用现状[J]. 水泥技术, 2022, 1(1): 13-17.
[4]	段文虎, 刘章名. 生料辊压机终粉磨系统智能控制方案的优化[J]. 水泥技术, 2021, 1(5): 51-54.
[5]	王飞, 康宇, 钟根, 钟永超. KVM外循环水泥辊磨半终粉磨系统及其应用 [J]. 水泥技术, 2021, 1(2): 23-25.
[6]	何毛, 李洪生, 马健, 王小峰, 杜鑫. 水泥辊压机终粉磨系统的工业化应用[J]. 水泥技术, 2020, 1(2): 17-20.
[7]	王奇, 于涛, 武晓, 滑松, 宋留庆. TRM型辊磨在赞比亚2 500t/d水泥熟料生产线的应用 [J]. 水泥技术, 2020, 1(1): 32-36.
[8]	石国平, 罗占仁, 王明治, 李洪, 柴星腾. 生料辊压机终粉磨系统技术研究及应用[J]. 水泥技术, 2020, 1(1): 17-22.
[9]	侯国锋, 王学民, 张黎, 吴卫国, 许芬. 辊压机终粉磨系统在生产钢铁渣微粉上的应用[J]. 水泥技术, 2019, 1(6): 31-34.
[10]	李维兴. 水泥半终粉磨系统的优化和质量改善[J]. 水泥技术, 2017, 1(5): 56-60.
[11]	王振生. 生料中卸球磨粉磨系统改为辊压机终粉磨系统的方案对比[J]. 水泥技术, 2017, 1(5): 39-40.
[12]	张峰亮. 5 000t/d熟料生产线生料粉磨系统改造[J]. 水泥技术, 2017, 1(4): 89-92.
[13]	赵晓东 . 采用辊压机终粉磨工艺制备矿渣微粉作水泥混合材[J]. 水泥技术, 2017, 1(4): 64-66.
[14]	侯国锋, 张黎, 褚旭, 王复然, 石国平, 许芬. 辊压机终粉磨系统生产钢铁渣粉工艺设计及优化[J]. 水泥技术, 2017, 1(2): 45-48.
[15]	王庆福, 张博, 赵华鲁, 张泗强. 浅谈联合粉磨技术的应用经验[J]. 水泥技术, 2016, 1(2): 50-55.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed