篦冷机托辊装置流水线装配工艺探讨

doi:10.19698/j.cnki.1001-6171.20242019

下载:

PDF (8282KB)
输出: BibTeX | EndNote (RIS)

摘要介绍了篦冷机托辊装置的结构特点、工作原理及制造装配的相关技术要求，分析了传统装配工艺存在的问题并提出了改进方案，详细阐述了托辊装置流水线装配工艺和液压辅助工装夹具的设计原理和生产流程，实现了篦冷机托辊装置装配工作的标准化和流水线式作业，装配质量和效率大幅提升，产品竞争力显著增强，具有较高的推广价值。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	杨杰
	刘光辉
	杨钧
	梁鹏
	周建

关键词: 托辊装置液压夹具工艺流程流水线装配批量化生产

Abstract:

This article introduces the structural characteristics, working principles and relevant technical requirements for manufacturing and assembly for roller support devices of the grate cooler. It analyzes problems existing in traditional assembly processes and also proposes improvement schemes. It elaborates the assembly process for the roller support device assembly line and explains the design principle and production process of hydraulic auxiliary fixtures. The result of this research realizes the standardized assembly line for roller support devices of the grate cooler with streaming working style, which greatly improves assembly quality and efficiency, significantly enhances product competitiveness, and has high promotion value.

Key words: roller support device hydraulic fixture technological process assembly line for fabricating mass production

收稿日期: 2023-09-09 出版日期: 2024-03-25 发布日期: 2024-03-25 整期出版日期: 2024-03-25

ZTFLH:

TQ172.6

引用本文:

杨杰, 刘光辉, 杨钧, 梁鹏, 周建. 篦冷机托辊装置流水线装配工艺探讨[J]. 水泥技术, 2024, 1(2): 19-23.
YANG Jie, LIU Guanghui, YANG Jun, LIANG Peng, ZHOU Jian. Discussion on Assembly Process Line of Grate Cooler Roller Device. Cement Technology, 2024, 1(2): 19-23.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20242019 或 http://www.cemteck.com/CN/Y2024/V1/I2/19

[1]	徐元元. TRMS45.2矿渣辊磨的工作原理及调试 [J]. 水泥技术, 2018, 1(2): 43-46.
[2]	侯国锋, 张黎, 褚旭, 王复然, 石国平, 许芬. 辊压机终粉磨系统生产钢铁渣粉工艺设计及优化[J]. 水泥技术, 2017, 1(2): 45-48.
[3]	董艳超, 周建, 杨松. 篦冷机连接板加工工艺改进[J]. 水泥技术, 2016, 1(3): 81-83.
[4]	石光, 刘箴, 聂文海, 宋留庆, 徐昕. 辊磨在铅锌尾矿渣综合利用中的应用 [J]. 水泥技术, 2015, 1(3): 45-48.
[5]	石光, 刘箴, 赵剑波, 王庆利, 彭凌云. TRMS43.4矿渣辊磨的特点及应用[J]. 水泥技术, 2014, 1(2): 38-41.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .