Abstract: Influence factors of TG-DTG method to test the combustion characteristic of refuse derived fuel (RDF) for the cement kiln was studied; the relationship between the proximate analysis and the combustion characteristic parameters of RDF was discussed. The combustion characteristic parameters were taken as a combustion process evaluation for both RDF and coal, and their influence on thermal parameters of the cement kiln system was discussed. The research results showed that for RDF combustion characteristic TG-DTG test, the heating rate should be 20℃/min, surroundings gas oxygen concentration should be 21%, the flow rate should be 100ml/min. When ash content of the refuse derived fuel reduced, the volatile content increased, the ignition temperature would decrease, relatively the burning time extended. RDF combustion characteristic had an important influence on cement kiln operation stability, therefore cement production should cope with its sufficient combustion characteristic research, strictly control the proportion of alternative fuels, at the same time, pay close attention to the thermal parameters of kiln system.
郑旭, 刘晨, 王昕, 颜碧兰, 魏丽颖. 水泥窑用垃圾衍生燃料燃烧特性的TG-DTG研究[J]. 水泥技术, 2017, 1(2): 21-28.
ZHENG Xu, LIU Chen, WANG Xin, YAN Bilan, WEI Liying. Research on the Combustion Characteristics of RDF for Cement Kiln by TG-DTG. Cement Technology, 2017, 1(2): 21-28.