水泥厂电缆选型设计及敷设方案分析
天津水泥工业设计研究院有限公司,天津 300400
Cable Selection Design and Cable Laying Scheme Analysis for Cement Plant
Tianjin Cement Industry Design & Research Institute Co., Ltd. , Tianjin 300400, China
摘要
电缆敷设作为水泥工程基础项目,正逐步由人工敷设方式向机械化敷设方式转变,机械布线有助于降低成本、减少风险,提高电缆敷设效率。介绍了常用电力电缆的类型、敷设方式和重要参数,水泥厂厂区电缆主要包含电缆沟、电缆隧道、电缆桥架、电缆通廊、电缆排管等敷设方式。分析了采用传统人工敷设方式和机械化敷设方式敷设电缆在工时、效益等方面的差异,人工敷设电缆需投入大量人力,施工安全风险高,敷设效率<5%;机械化敷设电缆具有施工工期短、人力投入少,施工安全度及敷设效率较高等优势。
关键词:
电缆选型
敷设方案
机械化敷设
人工敷设
施工质量
Abstract:
Power cable laying mode is gradually shifting from manual mode to mechanical mode. It can reduce the costs and risks, improve the efficiency through the mechanical cable laying. This paper introduced the power cable type, laying mode and some important parameters. The cable routing is through cable trenches, cable tunnels, cable trays, cable corridors or cable conduits in cement plant. The differences between manual cable laying mode and mechanical cable laying mode in working hours and benefits was analyzed. Compared to mechanical cable laying mode, manual cable laying mode requires more manpower and meets higher construction risks and lower efficiency.
Key words:
cable type selection
laying scheme
mechanical cable laying
manual cable laying
construction quality
收稿日期: 2023-09-25
出版日期: 2024-03-25
发布日期: 2024-03-25
整期出版日期: 2024-03-25
引用本文:
李颖慧, 娄利江, 张俊峰, 张煜. 水泥厂电缆选型设计及敷设方案分析[J]. 水泥技术, 2024, 1(2): 49-.
LI Yinghui, LOU Lijiang, ZHANG Junfeng, ZHANG Yu. Cable Selection Design and Cable Laying Scheme Analysis for Cement Plant. Cement Technology, 2024, 1(2): 49-.
链接本文:
http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20242049
或
http://www.cemteck.com/CN/Y2024/V1/I2/49
[1]
. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China [J]. Cement Technology, 2018, 1(1): 17
-21
.
[2]
DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ) [J]. Cement Technology, 2018, 1(1): 22
-26
.
[3]
LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base [J]. Cement Technology, 2018, 1(1): 27
-31
.
[4]
LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel [J]. Cement Technology, 2018, 1(1): 32
-34
.
[5]
MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo [J]. Cement Technology, 2018, 1(1): 35
-38
.
[6]
HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38
-48
.
[7]
XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br# [J]. Cement Technology, 2018, 1(1): 49
-53
.
[8]
GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54
-59
.
[9]
WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects [J]. Cement Technology, 2018, 1(1): 60
-64
.
[10]
JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72
-73
.
Viewed
Full text
Abstract
Cited
Shared
Discussed