回转窑轮带轴向窜动原因分析及复位调整

doi:10.19698/j.cnki.1001-6171.20206045

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (2102KB)
输出: BibTeX | EndNote (RIS)

摘要回转窑运转时，一档轮带向上窜动移位34mm，磨损轮带挡块，影响生产安全运行。经分析研究，垫板间隙偏大、轮带两侧温度不均是造成轮带窜动的原因。经复位调整，更换轮带垫板，定期检测轮带滑移量，加强筒体温度管理，从根本上消除了这一安全运行隐患。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	冀永涛

关键词: 回转窑轮带轴向窜动垫板间隙

Abstract: When the rotary kiln is running, the shift of the first gear belt upward is 34mm, and the block of the gear belt is worn, which affects the safe operation of production. Through analysis and research, the large gap of the backing plate and the uneven temperature on both sides of the tire are the reasons of the tire moving. The hidden trouble of safe operation is eliminated by resetting and adjusting, replacing the cushion plate of the tyre, checking the slip of the tyre regularly, and strengthening the temperature management of the cylinder.

Key words: rotary kiln belt axial movement spacer clearance

收稿日期: 2020-02-10 出版日期: 2020-11-25 发布日期: 2020-12-07 整期出版日期: 2020-11-25

ZTFLH:

TQ172.622.29

引用本文:

冀永涛. 回转窑轮带轴向窜动原因分析及复位调整[J]. 水泥技术, 2020, 1(6): 45-46.
JI Yongtao. Cause Analysis and Reset Adjustment of Axial Movement of Rotary Kiln Tyre. Cement Technology, 2020, 1(6): 45-46.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20206045 或 http://www.cemteck.com/CN/Y2020/V1/I6/45

[1]	柴玉川, 高鹏, 崔丽霞. 大缩口回转窑运转功率的计算 [J]. 水泥技术, 2021, 1(1): 24-27.
[2]	赵鑫磊. 回转窑的调测方法[J]. 水泥技术, 2021, 1(1): 31-33.
[3]	师美高, 徐金福, 谭迪. 水泥窑耐火材料长周期运行的实践 [J]. 水泥技术, 2020, 1(4): 101-104.
[4]	温彩霞, 张云峰, 范宜斌, 黄顺源. 水泥回转窑筒体表面余热回收供暖系统的设计 [J]. 水泥技术, 2020, 1(1): 68-73.
[5]	贲道春, 仲跻松, 李金峰, 周文华. 托轮轴承座中心高度差配对与测量方法探讨 [J]. 水泥技术, 2019, 1(6): 50-56.
[6]	孙东霞, 王云亭, 王斌章, 张立国. 水泥回转窑大小齿轮传动故障分析和处理 [J]. 水泥技术, 2019, 1(1): 54-57.
[7]	李会如, 陶瑛, 孙学成, 任鞠萍. 危险废弃物焚烧装置优化配置与应用 [J]. 水泥技术, 2018, 1(6): 96-99.
[8]	孙学成, 吴蕾, 陶瑛, 任鞠萍. 回转窑自适应托轮支承装置及啮合传动装置的研究[J]. 水泥技术, 2018, 1(2): 47-49.
[9]	丛晓静, 许龙旭, 刘旭. 提高回转窑大型铸造齿圈质量的研究[J]. 水泥技术, 2018, 1(2): 39-42.
[10]	邓荣娟. 回转窑大齿圈铸造质量及热处理工艺的研究 [J]. 水泥技术, 2018, 1(2): 36-38.
[11]	邓荣娟. 回转窑大齿圈齿面的修复[J]. 水泥技术, 2017, 1(6): 57-60.
[12]	李宁, 赵亮. 回转窑燃烧器降低氮氧化物机理分析 [J]. 水泥技术, 2016, 1(6): 40-42.
[13]	邓建新, 王卫德. 浅谈回转窑振动原因及调整方法[J]. 水泥技术, 2016, 1(5): 51-53.
[14]	李连锁. 水泥回转窑筒体表面辐射能余热回收装置的应用[J]. 水泥技术, 2016, 1(1): 52-53.
[15]	郭涛, 彭学平, 刘继开, 武晓萍, 袁群. 水泥窑富氧燃烧技术研究现状及分析[J]. 水泥技术, 2015, 1(1): 46-48.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed