中型板式喂料机的改造

doi:10.19698/j.cnki.1001-6171.20193103

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (1296KB)
输出: BibTeX | EndNote (RIS)

摘要 HT公司B1400型中型板式喂料机在使用过程中行走轮和输送链条易损，维修更换不便，改造后，主要部件未进行更换，损坏的设备部件更换方便，改造费用相对较少，改造效果较好。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	黄新云

关键词: 板式喂料机部件设计改造

Abstract: HT Company's B1400 medium-sized plate feeder is vulnerable to wear and tear of traveling wheels and conveying chains during use, and is inconvenient to maintain and replace. After modification, the main components have not been replaced, the equipment components are easy to be replaced and damage, the renovation cost is relatively low, and the renovation effect is good.

Key words: plate feeder components design modification

收稿日期: 2018-12-27 出版日期: 2019-05-25 发布日期: 2019-05-29 整期出版日期: 2019-05-25

ZTFLH:

TQ172.687

引用本文:

黄新云. 中型板式喂料机的改造[J]. 水泥技术, 2019, 1(3): 103-104.
HUANG Xinyun. Modification of Medium Plate Feeder. Cement Technology, 2019, 1(3): 103-104.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20193103 或 http://www.cemteck.com/CN/Y2019/V1/I3/103

[1]	陈军, 丁再珍, 赵剑波, 于涛, 豆海建, 杜鑫, 徐兵波, 宋留庆, 刘迪, 邵青. 生料外循环辊磨技术及应用实例 [J]. 水泥技术, 2019, 1(4): 36-39.
[2]	宁波, 肖胜星. 基于solid edge脱硫系统管路设计的新思路及应用[J]. 水泥技术, 2019, 1(4): 79-82.
[3]	尚丽平, 宋亮亮. TSLM司德伯生料辊磨密封喂料器 [J]. 水泥技术, 2019, 1(4): 102-104.
[4]	刘迪, 豆海建, 聂文海, 柴星腾, 王奇, 宋留庆, 吕可馨. N-U型选粉机用于生料辊磨改造的实例分析 [J]. 水泥技术, 2019, 1(3): 45-47.
[5]	李小波, 廖正彪, 樊波. 精品机制砂石骨料生产线的工艺及设备探讨 [J]. 水泥技术, 2019, 1(3): 69-76.
[6]	张煜, 丛培泽, 李金海, 张龙. 吉尔吉斯斯坦某项目电气设计优化方案简介 [J]. 水泥技术, 2019, 1(2): 27-29.
[7]	王平. 石灰石破碎系统预筛分的改造 [J]. 水泥技术, 2019, 1(2): 95-100.
[8]	王烨, 于爱玲, 张爽. 辊压机粉磨系统中组合式选粉机的重量估算方法[J]. 水泥技术, 2019, 1(1): 38-40.
[9]	韩仲琦. 关于水泥绿色化的思考[J]. 水泥技术, 2018, 1(6): 21-26.
[10]	韩德夫. 协同处置城镇污泥水泥窑窑尾电改袋的设计与应用[J]. 水泥技术, 2018, 1(5): 88-90.
[11]	陈军, 聂文海, 于涛, 竹永奎, 王振中. 原料辊磨系统能耗分析及节能改造实例 [J]. 水泥技术, 2018, 1(5): 101-103.
[12]	李俊义, 吴灵宇, 胡亚东. 中美标准地震反应谱对比分析 [J]. 水泥技术, 2018, 1(4): 37-41.
[13]	李俊, 闫羽, 相冲. DTⅡ型胶带输送机三维设计软件的开发与应用 [J]. 水泥技术, 2018, 1(4): 45-48.
[14]	郭天代, 王秀龙, 孔庆森. 基于粘湿物料流动函数的喂料仓工艺设计[J]. 水泥技术, 2018, 1(3): 23-29.
[15]	崔雷, 王建光, 于玉, 张永林, 伍先舟. 5 000t/d生产线原料磨循环风机节能改造 [J]. 水泥技术, 2018, 1(3): 88-90.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[4]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[5]	YAO Piqiang, HAN Hui, YU Weimin. Study on Calcining and Preliminary Application of New Low Calcium Cement[J]. Cement Technology, 2018, 1(2): 17 -25 .
[6]	DENG Rongjuan. Study on Casting Quality and Heat Treatment for Rotary Kiln Girth Gear[J]. Cement Technology, 2018, 1(2): 36 -38 .
[7]	XU Yuanyuan. Working Principle and Comissioning of TRMS 45.2 Slag Roller Mill[J]. Cement Technology, 2018, 1(2): 43 -46 .
[8]	. Research on Rotary Kiln Self-adaptive Roller Supporting Device and Meshing Transmission Device [J]. Cement Technology, 2018, 1(2): 47 -49 .
[9]	LIN Renzhang, SHI Jiageng. Introduction of the Integrated Long Belt Conveyor in Sinoma DANGOTE Project[J]. Cement Technology, 2018, 1(2): 50 -55 .
[10]	ZHANG Yu. Application of Surge Protective Device in Low Voltage Distribution System of Cement Engineering [J]. Cement Technology, 2018, 1(2): 56 -58 .

Viewed

Full text

Abstract

Cited

Shared

Discussed