Please wait a minute...
水泥技术, 2019, 1(3): 100-102    doi: 10.19698/j.cnki.1001-6171.20193100
  技术改造 本期目录 | 过刊浏览 | 高级检索 |
转子秤在生料入窑系统中的应用
山东山铝环境新材料有限公司
Application of Rotor Scale in Raw Meal Feeding to Kiln System
Shandong Shanlv Enviromental New Material Co., Ltd.
下载:  PDF (2198KB) 
输出:  BibTeX | EndNote (RIS)      
摘要 针对水泥行业固体流量计在使用过程中存在的喂料不稳定、计量误差大、精度低等缺点,将水泥窑生料喂料系统改为转子秤喂料系统,流量调节阀改为气动闸板阀。改造后,反馈值波动<0.5%,入窑提升机电流波动<5A,标定的计量误差0.2%,计量精度和喂料稳定性均高于固体流量计。
服务
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章
范文礼
国东
杨海林
关键词:  固体流量计  转子秤  生料喂料    
Abstract: This paper puts forward that the cement industry change the cement kiln raw meal powder feeding system into rotor scale feeding system and flow regulating valve into air-powered cut-off valve in view of the shortcomings such as feeding instability, large metering error, low precision in use of solid flowmeter. After renovation, the fluctuation of value feedback is less than 0.5%; the current fluctuation of the elevator is less than 5A; the metering error of calibration is 0.2%; both the metering precision and feeding stability are higher than those of the solid flowmeter. 
Key words:  solid flowmeter    rotor scale    raw meal powder feeding
收稿日期:  2018-06-27                出版日期:  2019-05-25      发布日期:  2019-05-29      整期出版日期:  2019-05-25
ZTFLH:  TQ172.614.2  
引用本文:    
范文礼, 国东, 杨海林.
转子秤在生料入窑系统中的应用
[J]. 水泥技术, 2019, 1(3): 100-102.
FAN Wenli, GUO Dong, YANG Hailin. Application of Rotor Scale in Raw Meal Feeding to Kiln System. Cement Technology, 2019, 1(3): 100-102.
链接本文:  
http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20193100  或          http://www.cemteck.com/CN/Y2019/V1/I3/100
[1] 陈作炳, 王庆华, 陈思维, 崔亚伟.
CAN总线在转子秤控制系统中的应用与实现
[J]. 水泥技术, 2005, 1(2): 87-90.
[1] DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[2] LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[3] MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[4] HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[5] ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .
[6] LIU Xudong. How to Execute 60 kV Transmission Line EPC Project[J]. Cement Technology, 2018, 1(1): 89 -91 .
[7] MENG Lingju. [J]. Cement Technology, 2018, 1(1): 103 -104 .
[8] YAO Piqiang, HAN Hui, YU Weimin. Study on Calcining and Preliminary Application of New Low Calcium Cement[J]. Cement Technology, 2018, 1(2): 17 -25 .
[9] DOU Haijian, WANG Weili, QIN Zhonghua, DU Xin, CHAI Xingteng, YU Tao. The Flow Analysis Research of the Pressure Frame Wear Problem in a Roller Mill[J]. Cement Technology, 2018, 1(2): 26 -30 .
[10] JI Lei, ZHAO Xuhong, CAO Pei, ZHAO Yu, SUN He, HUANG Yongsheng, WEI Juan, ZHANG Guangfang, YU Gang, WU De Hou, . Study of Typical Pollutants' Solidification in Clinker in the Co-processing Hazardous Waste in Cement Kiln[J]. Cement Technology, 2018, 1(2): 31 -35 .
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
    PDF Preview