矿粉一键发货系统设计及应用

doi:10.19698/j.cnki.1001-6171.20234080

下载:

PDF (5643KB)
输出: BibTeX | EndNote (RIS)

摘要梳理了从汽车入场到矿粉计量、散装头下料、装车离场的矿粉发货全流程内容，分析了传统矿粉发货系统存在的人员沟通不畅、系统自动化程度低、信息精确度低等问题，提出了设计信息化、自动化程度较高的矿粉一键发货系统。现场运行实际表明，改造后的矿粉一键发货系统实现了线上发货的全流程自动化管理，每车装货时间由30min降至20min，发货效率提升了33%，每年可节省电费15.6万元，节约人工费用约48万元。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	李勇

关键词: 一键发货发运量控制发货效率智能设计

Abstract:

The whole process of mineral powder delivery from car entry to mineral powder measurement, bulk loading, loading and leaving was sorted out. The problems of poor communication, low automation and low accuracy in traditional mineral powder delivery system were analyzed. A one‐button mineral powder delivery system with high automation and information technology was proposed. The actual operation shows that the modified one-button delivery system realizes full process automation online delivery management, the loading time of each car is reduced from 30min to 20min, the delivery efficiency is increased by 33%, and the annual electricity cost can be saved by 156,000 yuan and the labor cost is saved by about 480,000 yuan.

Key words: one-button delivery delivery volume control delivery efficiency intelligent design

收稿日期: 2022-11-09 修回日期: 2023-07-25 出版日期: 2023-07-25 发布日期: 2023-07-25 整期出版日期: 2023-07-25

ZTFLH:

TH86

引用本文:

李勇. 矿粉一键发货系统设计及应用[J]. 水泥技术, 2023, 1(4): 80-85.
LI Yong. Design and Application of One-button Delivery System of Mineral Powder. Cement Technology, 2023, 1(4): 80-85.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20234080 或 http://www.cemteck.com/CN/Y2023/V1/I4/80

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .