LM3722N型矿渣辊磨的开发及应用

doi:10.19698/j.cnki.1001-6171.20203032

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (2514KB)
输出: BibTeX | EndNote (RIS)

摘要介绍了LM3722N型矿渣辊磨主要参数的选型计算方法及辊磨的结构、工作原理和设计特点，分析讨论了矿渣立式辊磨调试操作控制要点。从现场运行情况看，LM3722N型矿渣辊磨很好地达到了设计目的，矿渣处理量100t/h，比表面积400m²/kg，振动值5~12m/s。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	李光业
	孔金山

关键词: 矿渣立式辊磨气囊式蓄能器液压翻辊产品细度

Abstract: The paper introduces the selection and calculation method of the main parameters of LM3722N slag roller mill and the structure, working principle and design features of the mill. The commissioning and operation control points of the slag vertical roller mill are discussed. Operation on site showed that the LM3722N slag roller mill has well met the design objective. The capacity is 100t/h, the specific surface area is 400m²/kg, and the vibration value is 5~12m/s.

Key words: slag vertical roller mill bladder accumulator hydraulic turning roller product fineness

收稿日期: 2019-10-29 出版日期: 2020-05-25 发布日期: 2020-05-26 整期出版日期: 2020-05-25

ZTFLH:

TQ172.632.5

引用本文:

李光业, 孔金山.

LM3722N型矿渣辊磨的开发及应用

[J]. 水泥技术, 2020, 1(3): 32-36.
LI Guangye, KONG Jinshan. Development and Application of LM3722N Slag Roller Mill. Cement Technology, 2020, 1(3): 32-36.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20203032 或 http://www.cemteck.com/CN/Y2020/V1/I3/32

[1]	郭磊, 孙文东. 辊磨翻辊机构运动仿真分析 [J]. 水泥技术, 2020, 1(4): 17-20.
[2]	姚联国. 新型双出风口旋风筒在生料辊磨系统中的应用 [J]. 水泥技术, 2020, 1(4): 23-26.
[3]	郭磊, 孙文东, 丰旺, 于涛. TRML36.4脱硫石灰石辊磨的开发及应用 [J]. 水泥技术, 2020, 1(3): 21-24.
[4]	李德祥, 苑明华, 王玉荣, 陆小平. 辊磨液压系统选型及工况探讨 [J]. 水泥技术, 2020, 1(3): 25-31.
[5]	李光业, 孔金山. 立式辊磨在石膏粉磨上的应用 [J]. 水泥技术, 2020, 1(2): 31-35.
[6]	张忠海, 王莹, 左洪川, 刘静. 辊磨磨盘转速对粉磨能力的影响 [J]. 水泥技术, 2020, 1(2): 44-45.
[7]	王奇, 于涛, 武晓, 滑松, 宋留庆. TRM型辊磨在赞比亚2 500t/d水泥熟料生产线的应用 [J]. 水泥技术, 2020, 1(1): 32-36.
[8]	黄新云. 减速机高速轴轴承故障的处置 [J]. 水泥技术, 2019, 1(6): 101-102.
[9]	刘迪, 聂文海, 柴星腾, 王奇. 国产TRMK5341水泥辊磨的开发及应用 [J]. 水泥技术, 2019, 1(5): 19-22.
[10]	曹军波, 饶锐, 任森. 辊磨智能控制系统在水泥原料辊磨上的应用 [J]. 水泥技术, 2019, 1(5): 52-55.
[11]	方鹏. 浅谈辊磨选粉机下部轴承的改造方案 [J]. 水泥技术, 2019, 1(5): 102-104.
[12]	方鹏. 浅谈大型辊磨减速机维护方案 [J]. 水泥技术, 2019, 1(4): 45-48.
[13]	尚丽平, 宋亮亮. TSLM司德伯生料辊磨密封喂料器 [J]. 水泥技术, 2019, 1(4): 102-104.
[14]	蔡晓亮, 刘传胜, 丁再珍, 赵剑波, 陈心自, 高云详, 王倩. TRMS60.3矿渣辊磨的技术特点及应用 [J]. 水泥技术, 2019, 1(3): 40-44.
[15]	赵小雷. 高效节能循环风机在ATOX生料磨系统中的应用[J]. 水泥技术, 2019, 1(2): 44-47.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed