辊磨翻辊机构运动仿真分析

doi:10.19698/j.cnki.1001-6171.20204017

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (3414KB)
输出: BibTeX | EndNote (RIS)

摘要通过对TRM型辊磨翻辊机构进行分析，使用三维设计软件SolidWorks对辊磨翻辊机构进行实体建模。借助于Motion仿真插件对翻辊机构进行运动仿真，得到驱动油缸活塞杆的运动学参数及上摇臂的传动角，并计算出翻辊油缸的输出拉力（推力），为翻辊机构的优化设计和翻辊油缸选型提供了理论依据。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	郭磊
	孙文东

关键词: TRM辊磨翻辊机构传动角运动仿真

Abstract: Based on the analysis of the TRM mill swing-out mechanism, the solid modeling of the mechanism is carried out by using the three-dimensional design software SolidWorks. By means of the analysis tool- Motion, motion simulation is carried out. The kinematic parameters of the Piston Rod driving the cylinder and the transmission angle of the upper rocker arm are obtained, and the output force of the roller cylinder is calculated, it provides a theoretical basis for the optimum design of the mechanism and the selection of the cylinder.

Key words: TRM vertical roller mill swing-out mechanism transmission angle motion simulation

收稿日期: 2020-03-09 出版日期: 2020-07-25 发布日期: 2020-07-27 整期出版日期: 2020-07-25

ZTFLH:

TQ172.632.5

引用本文:

郭磊, 孙文东.

辊磨翻辊机构运动仿真分析

[J]. 水泥技术, 2020, 1(4): 17-20.
GUO Lei, SUN Wendong. Motion Simulation Analysis of Swing-out Mechanism of Roller Mill. Cement Technology, 2020, 1(4): 17-20.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20204017 或 http://www.cemteck.com/CN/Y2020/V1/I4/17

[1]	孔金山, 李光业. LM型立式辊磨机在循环流化床锅炉脱硫系统中的应用 [J]. 水泥技术, 2020, 1(5): 46-49.
[2]	周文良. HRM3400生料辊磨选粉机转子密封的改进 [J]. 水泥技术, 2020, 1(5): 50-52.
[3]	姚联国. 新型双出风口旋风筒在生料辊磨系统中的应用 [J]. 水泥技术, 2020, 1(4): 23-26.
[4]	郭磊, 孙文东, 丰旺, 于涛. TRML36.4脱硫石灰石辊磨的开发及应用 [J]. 水泥技术, 2020, 1(3): 21-24.
[5]	李德祥, 苑明华, 王玉荣, 陆小平. 辊磨液压系统选型及工况探讨 [J]. 水泥技术, 2020, 1(3): 25-31.
[6]	李光业, 孔金山. LM3722N型矿渣辊磨的开发及应用 [J]. 水泥技术, 2020, 1(3): 32-36.
[7]	李光业, 孔金山. 立式辊磨在石膏粉磨上的应用 [J]. 水泥技术, 2020, 1(2): 31-35.
[8]	张忠海, 王莹, 左洪川, 刘静. 辊磨磨盘转速对粉磨能力的影响 [J]. 水泥技术, 2020, 1(2): 44-45.
[9]	王奇, 于涛, 武晓, 滑松, 宋留庆. TRM型辊磨在赞比亚2 500t/d水泥熟料生产线的应用 [J]. 水泥技术, 2020, 1(1): 32-36.
[10]	黄新云. 减速机高速轴轴承故障的处置 [J]. 水泥技术, 2019, 1(6): 101-102.
[11]	刘迪, 聂文海, 柴星腾, 王奇. 国产TRMK5341水泥辊磨的开发及应用 [J]. 水泥技术, 2019, 1(5): 19-22.
[12]	曹军波, 饶锐, 任森. 辊磨智能控制系统在水泥原料辊磨上的应用 [J]. 水泥技术, 2019, 1(5): 52-55.
[13]	方鹏. 浅谈辊磨选粉机下部轴承的改造方案 [J]. 水泥技术, 2019, 1(5): 102-104.
[14]	方鹏. 浅谈大型辊磨减速机维护方案 [J]. 水泥技术, 2019, 1(4): 45-48.
[15]	尚丽平, 宋亮亮. TSLM司德伯生料辊磨密封喂料器 [J]. 水泥技术, 2019, 1(4): 102-104.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed