回转窑托轮轴瓦高温故障原因分析及处理

doi:10.19698/j.cnki.1001-6171.20225033

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (6473KB)
输出: BibTeX | EndNote (RIS)

摘要

分析了几起典型回转窑托轮高温故障现场处理实例。托轮轴瓦作为回转窑支承装置主要部件，受窑工艺操作调整或安装存在偏差、日常运行维护管理不到位等因素影响，易出现托轮轴瓦高温及轴瓦损伤导致的停窑事故。通过采取定期检测回转窑各运行参数，全面掌握热工设备运行状态，及时消除设备隐患等措施，可有效预防托轮轴瓦高温故障的发生。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	王伟
	刘钢
	胡涛
	刘阳
	何峥辉

关键词: 回转窑托轮轴瓦歪斜量在线打磨

Abstract:

Several typical cases of high temperature fault for supporting rollers of rotary kiln have been analyzed. As the main part of the rotary kiln supporting device, the supporting rollers'shafts and bearing of rotary kiln is prone to high temperature and even result in the kiln stop accident caused by the damage of the shafts and bearing , due to the influence of various factors such as the adjustment of kiln process operation or the deviation of installation, the lack of daily operation and maintenance management and so on. The occurrence of high temperature fault of supporting rollers'shafts and bearing can be effectively prevented by taking measures such as regularly testing the operation parameters of rotary kiln for comprehensively grasping the operation state of thermal equipment, and then timely eliminating hidden dangers of equipment.

Key words: rotary kiln supporting rollers'shafts and bearing skewing online polishing

收稿日期: 2022-06-13 修回日期: 2022-09-25 出版日期: 2022-09-25 发布日期: 2022-09-25 整期出版日期: 2022-09-25

ZTFLH:

TQ172.622.29

引用本文:

王伟, 刘钢, 胡涛, 刘阳, 何峥辉. 回转窑托轮轴瓦高温故障原因分析及处理[J]. 水泥技术, 2022, 1(5): 33-40.
WANG Wei, LIU Gang, HU Tao, LIU Yang, HE Zhenghui. Cause Analysis and Treatment of High Temperature Fault of Supporting Rollers'Shafts and Bearing of Rotary Kiln. Cement Technology, 2022, 1(5): 33-40.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20225033 或 http://www.cemteck.com/CN/Y2022/V1/I5/33

[1]	王科学, 卢华武, 王明乾, 邓荣娟. 万吨级回转窑的升级改造及设备维护[J]. 水泥技术, 2022, 1(6): 15-20.
[2]	陈学勇, 陈廷伟, 钱伟, 许龙旭, 庞小平. 5 500t/d水泥熟料生产线烧成系统的技术改造[J]. 水泥技术, 2022, 1(4): 15-20.
[3]	崔洪坤, 刘志强. 4 500t/d水泥熟料生产线节能降耗优化措施[J]. 水泥技术, 2022, 1(4): 21-26.
[4]	刘小龙, 韩博文, 吴亮. 水泥窑节能降耗技术改造[J]. 水泥技术, 2022, 1(4): 66-71.
[5]	罗振, 王爱琴. 湿法脱硫系统不同工艺布置方式的对比分析[J]. 水泥技术, 2022, 1(3): 52-55.
[6]	黄海林, 姜树丰, 郝利炜, 刘鹏飞, 王小文. 水泥窑旁路放风系统及其工艺设计[J]. 水泥技术, 2022, 1(3): 67-72.
[7]	魏振生, 冀猛, 单秀勇, 魏阳. 新型灰斗卸料锁风阀的研发应用[J]. 水泥技术, 2022, 1(3): 73-78.
[8]	赵睿敏, 于永现, 凌金辉, 闫艳选. 脱硝分解炉的设计及实际应用[J]. 水泥技术, 2022, 1(2): 40-45.
[9]	黄彬, 孙文博. 分级燃烧技术在5 000t/d熟料生产线的应用实践[J]. 水泥技术, 2022, 1(2): 46-49.
[10]	宋亮亮, 尚丽平, 冯凯. 回转窑窑头密封改造[J]. 水泥技术, 2022, 1(2): 85-88.
[11]	莫计松, 潘国文, 刘骥, 黄兴望. 回转窑托轮调整的方法[J]. 水泥技术, 2022, 1(2): 89-92.
[12]	刘宏超. 水泥回转窑窑尾烟气超低排放的技术改造[J]. 水泥技术, 2022, 1(1): 18-22.
[13]	徐文斌, 都施金, 沈银鹏, 刘西诚. 回转窑托轮的在线修复[J]. 水泥技术, 2022, 1(1): 57-61.
[14]	曹辉辉. 电石渣配料生产线回转窑结圈分析与处理[J]. 水泥技术, 2022, 1(1): 79-82.
[15]	丘展明. 水泥生产“跑冒滴漏”现象分析及治理实例[J]. 水泥技术, 2021, 1(6): 65-69.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	DI Dongren, TAO Congxi, CHAI Xingteng. Revision of Cement Energy Consumption Standards and Energy Saving Technology(Ⅰ)[J]. Cement Technology, 2018, 1(1): 22 -26 .
[3]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[4]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[5]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[6]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[7]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[8]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[9]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[10]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .

Viewed

Full text

Abstract

Cited

Shared

Discussed