基于SIMATIC ET200SP分布式I/O的辊压机控制系统的结构设计

doi:10.19698/j.cnki.1001-6171.20235077

摘要
相关文章
推荐阅读
Metrics

下载:

PDF (9451KB)
输出: BibTeX | EndNote (RIS)

摘要通过研究辊压机集中式布置控制系统的结构和优缺点，设计并开发了一种基于SIMATIC ET200SP分布式I/O系统的辊压机控制系统。集中式布置辊压机控制系统可实现设备的统一调度、集中控制，但兼容性及扩展性较差，施工维护难，经济投入大；而基于SIMATIC ET200SP分布式I/O系统的辊压机控制系统具有高度灵活、可扩展、功能全面、可靠性及安全较高的优点，已成功应用于多个现场。某项目现场实际应用显示，分布式I/O辊压机控制系统安装周期较预期缩短了约60%，施工投入减少了约50%，线缆使用量减少了约80%，系统运行稳定，经济效益显著。

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	（）
	作者相关文章
	黄贺

关键词: 辊压机控制系统集中式布置现场总线分布式I/O 智能化

Abstract: The control system of roller press based on the SIMATIC ET200SP distributed I/O system has been designed and developed through the study of the structure and features of the centralized control system. The centralized layout control system of roll press enables unified scheduling and centralized control of equipment, but it has poor compatibility and scalability, difficult construction, maintenance, and requires a large economic investment. The control system of roller press based on the SIMATIC ET200SP distributed I/O system has the advantages of high flexibility, scalability, comprehensive functionality, and high reliability and safety. It has been successfully applied in multiple projects. The actual application of a project shows that the installation cycle of the distributed I/O roller control system is about 60% shorter than expected, the construction investment is reduced by about 50%, and the cable usage is reduced by about 80%. The system operates stably and brings significant economic benefits.

Key words: control system of roller press centralized layout field bus distributed I/O intelligent

收稿日期: 2022-12-26 出版日期: 2023-09-25 发布日期: 2023-09-26 整期出版日期: 2023-09-25

ZTFLH:

TP273.5

引用本文:

黄贺. 基于SIMATIC ET200SP分布式I/O的辊压机控制系统的结构设计[J]. 水泥技术, 2023, 1(5): 77-80.
HUANG He. Structure Design of Control System of Roller Press Based on SIMATIC ET200SP Distributed I/O. Cement Technology, 2023, 1(5): 77-80.

链接本文:

http://www.cemteck.com/CN/10.19698/j.cnki.1001-6171.20235077 或 http://www.cemteck.com/CN/Y2023/V1/I5/77

[1]	孙小永. 智慧型工程项目管理平台的开发与设计 [J]. 水泥技术, 2023, 1(6): 36-40.
[2]	师华东. 骨料生产线司机自助定量装车系统设计[J]. 水泥技术, 2023, 1(4): 72-79.
[3]	石国平, 秦中华, 王明治, 柴星腾, 李铭哲. 大规格生料辊压机终粉磨系统的工业应用[J]. 水泥技术, 2021, 1(5): 15-20.
[4]	邵磊. 水泥窑氮氧化物超低排放的技术改造[J]. 水泥技术, 2021, 1(5): 47-50.
[5]	郁国强, 张宝刚, 董克忠, 赵小雷. 新型干法水泥生产线设备精细化管理的应用[J]. 水泥技术, 2020, 1(6): 33-40.
[6]	徐文斌, 袁明伟, 吴福, 王仕进, 章星. 智能质量控制系统在水泥生产线上的应用 [J]. 水泥技术, 2020, 1(6): 53-57.
[7]	王爱琴, 于浩波, 罗振, 李志军. 石灰石-石膏湿法烟气脱硫智能化控制系统 [J]. 水泥技术, 2020, 1(6): 30-32.
[8]	黄贺. 三维图像识别成形技术在辊压机辊面监测上的应用 [J]. 水泥技术, 2020, 1(5): 71-73.
[9]	阎素玲, 祝强. 水泥厂余热电站DCS系统方案的技术经济比较与分析 [J]. 水泥技术, 2014, 1(5): 83-87.
[10]	李祖林, , 桂卫华. 现场总线技术在回转窑传动控制中的应用[J]. 水泥技术, 2007, 1(4): 86-88.
[11]	汪华, 温杰. SIMATIC S7 过程控制系统在巴基斯坦LUCKY水泥厂的应用 [J]. 水泥技术, 2007, 1(2): 85-87.
[12]	张德军, 李明良, 彭金龙, 张清枝. Rosemount现场总线仪表在5000t／d水泥生产线的应用研究[J]. 水泥技术, 2006, 1(5): 90-93.

[1]	. Review and Prospect of Engineering Practice of Waste Disposal in Cement Kiln in China[J]. Cement Technology, 2018, 1(1): 17 -21 .
[2]	LIU Yonggang, GAO Hongwei, XIAO Guiqing. Design Method of Road Structure Using Lean Concrete Base[J]. Cement Technology, 2018, 1(1): 27 -31 .
[3]	LIU Xu, LI Liang. Investigation of New Medium Temperature Wear-resistant Alloy Steel[J]. Cement Technology, 2018, 1(1): 32 -34 .
[4]	MA Debao. Finite Element Analysis of Inverted Cone in Raw Meal Silo[J]. Cement Technology, 2018, 1(1): 35 -38 .
[5]	HAN Zhongqi. [J]. Cement Technology, 2018, 1(1): 38 -48 .
[6]	XIE Jianzhong, LIAN Xuewen. Analysis and Solution of Segregation of the Kiln Ash in Continuous Raw Meal Homogenization Silo#br#[J]. Cement Technology, 2018, 1(1): 49 -53 .
[7]	GUAN Laiqing, HE Yongxian. [J]. Cement Technology, 2018, 1(1): 54 -59 .
[8]	WEI Can, ZHANG Yuanyuan, AI Jun. Application of Cement Intelligent Control System in Overseas Projects[J]. Cement Technology, 2018, 1(1): 60 -64 .
[9]	JIN Shuang. [J]. Cement Technology, 2018, 1(1): 72 -73 .
[10]	ZHANG Jiangtao, LIU Baoliang. Processing of the Wet Materials of the Winter Cement Factory in the High Cold Region[J]. Cement Technology, 2018, 1(1): 74 -82 .

Viewed

Full text

Abstract

Cited

Shared

Discussed